You find a good way to grind out the punch? I didnt have an angle grinder with me just a bench grinder, took forever and is rough.
Its irritating because the punch is a viewing window for the LEDs and the pins are set for rotation. But then a second engineer designer smoked crack and finished up the design On Thu, Nov 4, 2021, 4:14 PM Mathew Howard <[email protected]> wrote: > been there, done that... > > On Thu, Nov 4, 2021 at 4:11 PM Steve Jones <[email protected]> > wrote: > >> -- >> AF mailing list >> [email protected] >> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >> > -- > AF mailing list > [email protected] > http://af.afmug.com/mailman/listinfo/af_af.afmug.com >
-- AF mailing list [email protected] http://af.afmug.com/mailman/listinfo/af_af.afmug.com
