I wonder 9f the punch spec was to punch the other direction. Theres no real reason for the tabs to be offset. I just broke those out since they dont seem to serve any real purpose other than irritating a person on field swaps
On Thu, Nov 4, 2021, 4:42 PM Mathew Howard <[email protected]> wrote: > Cutting of the metal tabs with something like an angle grinder with a > cut-off wheel in it would probably work pretty well. I think I used a 3" > cut-off tool last time, which didn't work too badly. I've tried just > bending them out of the way, but that causes problems. > > It really annoys me, because all they would've needed to do is shift those > tabs over like 1/8" and it would've worked just fine either way. It almost > looks like they intentionally designed it to be able to flip over, and then > changed it slightly so it couldn't. > > On Thu, Nov 4, 2021 at 4:28 PM Steve Jones <[email protected]> > wrote: > >> You find a good way to grind out the punch? I didnt have an angle grinder >> with me just a bench grinder, took forever and is rough. >> >> Its irritating because the punch is a viewing window for the LEDs and the >> pins are set for rotation. But then a second engineer designer smoked crack >> and finished up the design >> >> On Thu, Nov 4, 2021, 4:14 PM Mathew Howard <[email protected]> wrote: >> >>> been there, done that... >>> >>> On Thu, Nov 4, 2021 at 4:11 PM Steve Jones <[email protected]> >>> wrote: >>> >>>> -- >>>> AF mailing list >>>> [email protected] >>>> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >>>> >>> -- >>> AF mailing list >>> [email protected] >>> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >>> >> -- >> AF mailing list >> [email protected] >> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >> > -- > AF mailing list > [email protected] > http://af.afmug.com/mailman/listinfo/af_af.afmug.com >
-- AF mailing list [email protected] http://af.afmug.com/mailman/listinfo/af_af.afmug.com
