Yeah I was thinking you’d not quite get a full 100mb on a 20mhz channel. Might be 80-90.
I would plan on 5.6ghz and 40mhz. -Adam From: AF <[email protected]> On Behalf Of Steve Jones Sent: Tuesday, May 24, 2022 12:50 PM To: AnimalFarm Microwave Users Group <[email protected]> Subject: Re: [AFMUG] EPMP PTP Throughput for not critical i use f200 in DFS and 40mhz. Radio speedtests will show that throughput On Tue, May 24, 2022 at 11:34 AM Ryan Ray <[email protected] <mailto:[email protected]> > wrote: You'll be right on the edge. Should work. On Tue, May 24, 2022 at 8:25 AM Nate Burke <[email protected] <mailto:[email protected]> > wrote: I need to do a 1 mile PTP hop on the cheap. Only looking for ~100mb. I have a set of EPMP Force 200 radios on the shelf. Can I get 100mb out of a 20mhz channel in ePTP Mode with a pair of Force200s? I'm pretty sure a set of Force300's could do it, but the boss want's me to use some old stock inventory for this. -- AF mailing list [email protected] <mailto:[email protected]> http://af.afmug.com/mailman/listinfo/af_af.afmug.com -- AF mailing list [email protected] <mailto:[email protected]> http://af.afmug.com/mailman/listinfo/af_af.afmug.com
-- AF mailing list [email protected] http://af.afmug.com/mailman/listinfo/af_af.afmug.com
