On a 1 mile link, there should be more than enough signal to do 256qam, so you would gain a fair amount from Force 300s (assuming LOS and no noise, of course)
On Tue, May 24, 2022 at 4:25 PM Josh Luthman <[email protected]> wrote: > 5 b/hz on Force 200. About 100 meg aggregate. Perfect signal, no noise. > Force 300 won't be all that much better unless you have a better signal > anyway. > > On Tue, May 24, 2022 at 3:26 PM <[email protected]> wrote: > >> Yeah I was thinking you’d not quite get a full 100mb on a 20mhz channel. >> Might be 80-90. >> >> I would plan on 5.6ghz and 40mhz. >> >> >> >> -Adam >> >> >> >> >> >> *From:* AF <[email protected]> *On Behalf Of *Steve Jones >> *Sent:* Tuesday, May 24, 2022 12:50 PM >> *To:* AnimalFarm Microwave Users Group <[email protected]> >> *Subject:* Re: [AFMUG] EPMP PTP Throughput >> >> >> >> for not critical i use f200 in DFS and 40mhz. Radio speedtests will show >> that throughput >> >> >> >> On Tue, May 24, 2022 at 11:34 AM Ryan Ray <[email protected]> wrote: >> >> You'll be right on the edge. Should work. >> >> >> >> On Tue, May 24, 2022 at 8:25 AM Nate Burke <[email protected]> wrote: >> >> I need to do a 1 mile PTP hop on the cheap. Only looking for ~100mb. I >> have a set of EPMP Force 200 radios on the shelf. Can I get 100mb out >> of a 20mhz channel in ePTP Mode with a pair of Force200s? I'm pretty >> sure a set of Force300's could do it, but the boss want's me to use some >> old stock inventory for this. >> >> >> >> -- >> AF mailing list >> [email protected] >> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >> >> -- >> AF mailing list >> [email protected] >> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >> >> -- >> AF mailing list >> [email protected] >> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >> > -- > AF mailing list > [email protected] > http://af.afmug.com/mailman/listinfo/af_af.afmug.com >
-- AF mailing list [email protected] http://af.afmug.com/mailman/listinfo/af_af.afmug.com
