Yeah, if you have access to the inside of the pipe. More to Steve’s point, I am sure you can get some current to flow in the water with a high enough voltage. Perhaps the appropriate step up transformer could make it happen. Might take 300 volts or so. Assuming the current can find a return path. Be a fun experiment to try.
From: Kevin Neal via AF Sent: Tuesday, November 15, 2022 11:46 AM To: AnimalFarm Microwave Users Group Cc: Kevin Neal Subject: Re: [AFMUG] EXTERNAL - Water and rf You can use a metal fish tape and then put your locate transmitter on that. -Kevin From: AF <[email protected]> On Behalf Of Steve Jones Sent: Tuesday, November 15, 2022 11:26 AM To: AnimalFarm Microwave Users Group <[email protected]> Subject: EXTERNAL - [AFMUG] Water and rf CAUTION: This email originated from outside of the organization. Do not click links or open attachments unless you recognize the sender and know the content is safe. Please report all suspicious emails to [email protected] as an attachment. I assume no, but i need one of you nerds to verify. If im trying to find plastic water lines, is there a frequency that would travel through water as the conductor? If I use a plug at the spigot with a nail in it for my positive probe wire and the same for a ground elsewhere in the water circuit, it is possible to get a detectable signal on a utility locator? im assuming since submarines have to surface to communicate my question has long since been answered -------------------------------------------------------------------------------- -- AF mailing list [email protected] http://af.afmug.com/mailman/listinfo/af_af.afmug.com
-- AF mailing list [email protected] http://af.afmug.com/mailman/listinfo/af_af.afmug.com
