Something like this in a NEMA enclosure? Dinkle Assembly Kit DK10N Red/Black 10 Gang with Jumpers DIN Rail Terminal Blocks, 6-20 AWG, 60 Amp, 600 Volt https://a.co/d/gNA1zcn
Or power poles Electronics-Salon Slim DIN Rail Mount 30A/60V 6-Position Power Distribution Block Module, for Power Pole Connectors https://a.co/d/8sZiGdN Jason Wilson Remotely Located Critical Infrastructure Service Provider Providing High Speed Internet to out of the way places. 530-651-1736 530-748-9608 Cell www.remotelylocated.com On Thu, Nov 17, 2022, 08:50 Nate Burke <n...@blastcomm.com> wrote: > Mikrotik makes a nice outdoor fiber switch with a handfull of 10G > ports. Does anyone make something similar for DC Distribution? Run a > single power cable up a tower and DC to multiple radios? I'm thinking > like 3 or 4 licensed radios each needing 2 wire DC input and 10G fiber. > Rather than running individual power wires for each one. I've used a > UBNT Edgepoint S16, taking the 56v POE Output ports, and running them > through the MCT GIGE-POE to extract 2wire power to run to the radio. > But that's extra pieces needing a place to be mounted. > > Would the Site Monitor 5 channel PDU fit the bill? IT says 3A per > channel, and 8A total. So in theory that should be able to provide > about 140w per radio. Could put it in some sort of NEMA with a DIN > mount. The Sitemonitor base is hardened, would the PDU be as well? > > Are there other options? > > -- > AF mailing list > AF@af.afmug.com > http://af.afmug.com/mailman/listinfo/af_af.afmug.com >
-- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com
