Doesn’t it depend on terrain and propagation models? I heard in the flat 
midwest it’s so noisy due to propagation that there’s not much in 6GHz that’s 
useable. We have these things called mountains, which helps. There’s not much 
here in licensed links in the upper band. I don’t know the mysteries of AFC 
yet, what am I in for?

> On May 22, 2025, at 9:47 AM, castarritt <[email protected]> wrote:
> 
> Based on how many of our Tarana 6 GHz subscribers can't get AFC grants for 
> all four carriers, I wouldn't even consider using a single carrier 6 Ghz PTMP 
> like the 4600 at this point.  I would only consider it a functional setup if 
> I had two clusters on each tower so I could have two different channels for 
> each SM to connect to.  Good luck getting 4x 80 Mhz carriers for that, many 
> of our sites can't even get 4x 40Mhz at the full 36dBm.
> 
> On Thu, May 22, 2025 at 11:39 AM <[email protected] 
> <mailto:[email protected]>> wrote:
>> How far away is the customer?
>> 
>>  
>> 
>> Rory
>> 
>>  
>> 
>> From: AF <[email protected] <mailto:[email protected]>> On 
>> Behalf Of Joe Novak
>> Sent: Thursday, May 22, 2025 9:36 AM
>> To: AnimalFarm Microwave Users Group <[email protected] 
>> <mailto:[email protected]>>
>> Subject: Re: [AFMUG] ePMP 6GHz working great!
>> 
>>  
>> 
>> AFC Based. 30dBm without GPS lock, 36dBm possible with GPS lock.
>> 
>>  
>> 
>> Example of the frequency chart on one of my PTP links:
>> 
>>  
>> 
>> <image001.png>
>> 
>> 
>>  
>> 
>> -Joe
>> 
>>  
>> 
>> On Thu, May 22, 2025 at 11:29 AM Adam Moffett <[email protected] 
>> <mailto:[email protected]>> wrote:
>> 
>> Remind me how 6ghz works....is the device supposed to talk to the FCC 
>> mothership and get permission to use the channel?
>> 
>>  
>> 
>>  
>> 
>> From: AF <[email protected] <mailto:[email protected]>> on 
>> behalf of Dev <[email protected] <mailto:[email protected]>>
>> Sent: Thursday, May 22, 2025 12:20 PM
>> To: AnimalFarm Microwave Users Group <[email protected] 
>> <mailto:[email protected]>>
>> Subject: [AFMUG] ePMP 6GHz working great! 
>> 
>>  
>> 
>> Getting over 500Mbps on an 80MHz channel in 6GHz with the ePMP 4600 2x2 AP 
>> gear at -66dB - customer happy!
>> 
>> -- 
>> AF mailing list
>> [email protected] <mailto:[email protected]>
>> http://af.afmug.com/mailman/listinfo/af_af.afmug.com
>> 
>> -- 
>> AF mailing list
>> [email protected] <mailto:[email protected]>
>> http://af.afmug.com/mailman/listinfo/af_af.afmug.com
> -- 
> AF mailing list
> [email protected] <mailto:[email protected]>
> http://af.afmug.com/mailman/listinfo/af_af.afmug.com

-- 
AF mailing list
[email protected]
http://af.afmug.com/mailman/listinfo/af_af.afmug.com

Reply via email to