nerd On Thu, Jun 5, 2025 at 6:05 AM Forrest Christian (List Account) < [email protected]> wrote:
> Let be slightly more specific. All of powinjector or rackinjector devices > can do an Amp per pair of pairs. So if you're using a 4 pair power scheme > that is 2A per port or 96W if you're using 48V. Two pair schemes are > limited to 1A per port and 24V provides half the wattage. > > All of our power inputs are rated at 10A. So if you have 16 ports in a > rackinjector each taking just under 2A you'll need to split them evenly > between the three input ports. > > I don't know any radios that need the full 2A. Most top out at 750mA per > pair of pairs so you could at most have 24A total on a rackinjector. > > On the powerinjectors, at 2A max per port x 4 ports, you're under 10A so > you don't need to split the inputs. It is better to try to split the ports > between the two inputs just because you end up with less voltage drop and > heat generation if you do so. > > > > - Forrest > > On Thu, Jun 5, 2025, 4:50 AM Forrest Christian (List Account) < > [email protected]> wrote: > >> Per port. >> >> - Forrest >> >> On Wed, Jun 4, 2025, 1:45 PM Tyson Burris <[email protected]> wrote: >> >>> Is that 90W across all 4 ports (total) or per port? >>> >>> >>> >>> >>> >>> *Tyson Burris* >>> *President & CEO* >>> >>> >>> >>> Internet Communications Inc (ICI) >>> >>> 739 Commerce Dr. Franklin, IN 46131 >>> <https://www.google.com/maps/search/739+Commerce+Dr.+Franklin,+IN+46131?entry=gmail&source=g> >>> >>> >>> >>> >>> [image: Mobile mobile-icon]317-412-1540 (emergency/after-hours) >>> [image: phone phone-icon]317-738-0320 (office) >>> [image: Email email-icon] [email protected] >>> [image: website website-icon] www.surfici.net >>> >>> >>> >>> >>> >>> *Fixed Wireless Broadband - PtP/PtMP Solutions – Indoor/Oudoor Wifi - IP >>> Cameras - Fiber – MDUs * >>> >>> >>> >>> *Active Member To The Following**:* >>> >>> >>> >>> WISPA <http://www.wispa.org/> >>> >>> NBBC <http://www.nbbc.coop/> >>> >>> >>> >>> Confidentiality Notice: >>> >>> >>> >>> This email and any files transmitted with it are confidential and >>> intended solely for the use of the individual or entity to whom they are >>> addressed. If you are not the intended recipient, you are hereby notified >>> that any dissemination, distribution, or copying of this communication is >>> strictly prohibited. If you have received this email in error, please >>> notify the sender immediately and delete this email from your system. >>> >>> >>> >>> No Binding Agreement: >>> >>> >>> >>> This email is not a binding agreement or contract of any kind, unless it >>> specifically states otherwise and expressly refers to a duly authorized >>> agreement signed by both parties. Any views or opinions presented in this >>> email are solely those of mine alone and do not necessarily represent those >>> of the company. If you have any doubts about the validity or enforceability >>> of any agreement or arrangement discussed in this email, please consult >>> with an attorney. >>> >>> >>> >>> *From:* AF <[email protected]> *On Behalf Of *Forrest Christian >>> (List Account) >>> *Sent:* Wednesday, June 4, 2025 2:51 PM >>> *To:* AnimalFarm Microwave Users Group <[email protected]> >>> *Subject:* Re: [AFMUG] syncinjector wattage limits >>> >>> >>> >>> Yes. They should be good up to around 90W. >>> >>> >>> >>> But I know the 4500 is fine. Didn't realize they were 60W. >>> >>> >>> >>> - Forrest >>> >>> >>> >>> On Wed, Jun 4, 2025, 9:58 AM Steve Jones <[email protected]> >>> wrote: >>> >>> forrest, >>> >>> >>> >>> do the non rack syncinjectors support the 60 watt epmp 4500 series? >>> >>> >>> >>> -- >>> AF mailing list >>> [email protected] >>> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >>> >>> -- >>> AF mailing list >>> [email protected] >>> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >>> >> -- > AF mailing list > [email protected] > http://af.afmug.com/mailman/listinfo/af_af.afmug.com >
-- AF mailing list [email protected] http://af.afmug.com/mailman/listinfo/af_af.afmug.com
