Something like this? https://www.amazon.com/dp/B0D45TC9D1
I think I’ve seen them at stores, haven’t used them. From: AF <[email protected]> On Behalf Of Jan-GAMs Sent: Monday, October 12, 2026 2:50 PM To: [email protected] Subject: Re: [AFMUG] 2-post rack lifter I used to rent these when I needed to. It was a small hydraulic jack with a L-shaped bracket that fit between the top of the lift and bent to the floor. It took two, one for each side of the machine. You lift the machine off of the floor and then slide a pallet-jack mover under the machine and move it to where you need it. Then use the small jacks to get the machine off the pallet-jack. The bracket is all you need if you have the other three components handy. On 10/12/26 12:15, Adam Moffett wrote: Is there something that can lift up a 2-post rack with hundreds of pounds of equipment in it? I have to move a couple of racks for flooring work in a building. It'd be so easy if I could just lift them up 4 or 5 inches and slip a steel dolly under each one.
-- AF mailing list [email protected] http://af.afmug.com/mailman/listinfo/af_af.afmug.com
