Can't you just bolt something to the front/back of the rack and then raise them with a bottle jack (or big ass car jack)? Might be a little hard on those two screws would be my only concern.
On Mon, Oct 12, 2026 at 3:50 PM Jan-GAMs <[email protected]> wrote: > I used to rent these when I needed to. It was a small hydraulic jack with > a L-shaped bracket that fit between the top of the lift and bent to the > floor. It took two, one for each side of the machine. You lift the > machine off of the floor and then slide a pallet-jack mover under the > machine and move it to where you need it. Then use the small jacks to get > the machine off the pallet-jack. The bracket is all you need if you have > the other three components handy. > On 10/12/26 12:15, Adam Moffett wrote: > > Is there something that can lift up a 2-post rack with hundreds of pounds > of equipment in it? > > I have to move a couple of racks for flooring work in a building. It'd be > so easy if I could just lift them up 4 or 5 inches and slip a steel dolly > under each one. > > -- > AF mailing list > [email protected] > http://af.afmug.com/mailman/listinfo/af_af.afmug.com >
-- AF mailing list [email protected] http://af.afmug.com/mailman/listinfo/af_af.afmug.com
