Convenience and function is way overrated On Thu, Sep 18, 2014 at 12:56 PM, George Skorup (Cyber Broadcasting) via Af <[email protected]> wrote:
> I know a TFTP config download kind of thing was talked about before. But > it would be nice if we could manually apply a config template file directly > through the SM GUI, so I can have the guys get new or recovered radios set > up without having to mess with too many things (AP, TFTP server, etc), just > upload file.. apply, reboot, whatever. > > > On 9/18/2014 10:00 AM, Aaron Schneider via Af wrote: > >> Hi Bill - >> >> 1) coming in 13.2 >> 2) coming in 13.2, NAT table size is configurable from 1024 - 8192 >> entries, there is a configuration OID, and will be a current table size oid >> 3) possibly coming in 13.3, can't promise that yet >> 4) coming in 13.3, planning to have something at WISPAPALOOZA to demo, >> more than just a config file. I sent some information about this awhile >> back. >> 5) we are working on an external frame calc tool but not sure of the >> timeline of that. Will make sure to add this idea to that list (point to >> an AP to use as a "starting point"). >> >> I'll send more details on #4 soon and we will be publishing the config >> file format. >> >> Regards, >> >> -Aaron >> >> >> -----Original Message----- >> From: Af [mailto:[email protected]] >> On Behalf Of Bill Prince via Af >> Sent: Wednesday, September 17, 2014 6:31 PM >> To: Motorola III >> Subject: [AFMUG] Dear Cambium >> >> >> Please let us know if: >> >> 1. The femtocell fix is in the pipe (or not) 2. There will be a trap >> on NAT table full, or at least an OID that >> shows the number of entries in the NAT table 3. As an alternative >> to #2, perhaps a way to limit the number of MAC >> addresses allowed behind an SM >> 4. A text-based configuration file >> 5. A "do this timing" that lets us just set an AP to match some other >> AP as closely as possible by specifying the appropriate frame >> dimensions (or maybe just the other APs IP address (now that would >> be cool) >> >> TNX >> >> >> -- >> bp >> >> > -- All parts should go together without forcing. You must remember that the parts you are reassembling were disassembled by you. Therefore, if you can't get them together again, there must be a reason. By all means, do not use a hammer. -- IBM maintenance manual, 1925
