I already have installed bind through webmin, it is a newer version, just by a couple revisions but the ubuntu one wont update any more its BIND version 9.8.2 I can manually add the slave zone and test the transfer it updates from the master, I just assumed I should be able to add it as another slave and have it populate all the way
On Thu, Oct 2, 2014 at 5:30 PM, Ken Hohhof via Af <[email protected]> wrote: > You need a named.conf that defines the slave zones and the IP address > of the master. > > But first step is to download/compile/install the latest version of BIND, > it’s actually quite easy. I doubt you can get the version you want via yum > update because CentOS is based on RHEL which is always a few steps behind. > Given the DNS attacks, you want the latest BIND. You might then want to > lock out the package from being updated by yum. > > > *From:* That One Guy via Af <[email protected]> > *Sent:* Thursday, October 02, 2014 4:36 PM > *To:* [email protected] > *Subject:* Re: [AFMUG] DNS server for guys who dont want to be gurus > > So Im at a new Centos with webmin fresh bind install. > We have one master, one slave server > I have never set up bind, this was done before me. > If I were to take down the old slave server and bring this one up on its > IP will the master update this one, or is there a config I need to move > over. Im more comfotable doing the slave first. > These are all webmin, but the original is ubuntu and the new is centos > > On Thu, Oct 2, 2014 at 2:00 PM, Paul Stewart via Af <[email protected]> wrote: > >> I always install CentOS bare bones …. “minimal server” is what the >> installation will call it. This way you can install whatever you like >> after installation and not worry about removing many dozen packages you >> don’t need… >> >> >> >> Just my preference anyways…. >> >> >> >> *From:* Af [mailto:[email protected]] *On Behalf Of *That One Guy via >> Af >> *Sent:* Thursday, October 02, 2014 2:24 PM >> *To:* [email protected] >> *Subject:* Re: [AFMUG] DNS server for guys who dont want to be gurus >> >> >> >> 2 questions in this >> >> 1. when running through the current centos installation, what do i select >> for the server type, for powercode it says select basic server >> >> 2. is there a guide for building dedicated centos servers based on server >> purpose? I assume there are packages I dont need to install if its only got >> this purpose >> >> >> >> On Thu, Oct 2, 2014 at 1:13 PM, Paul Stewart via Af <[email protected]> wrote: >> >> CentOS+BIND+Webmin J I can’t remember but Usermin might be the part >> you’re looking for specific to users updating their own DNS….. >> >> >> >> >> >> >> >> *From:* Af [mailto:[email protected]] *On Behalf Of *That One Guy via >> Af >> *Sent:* Thursday, October 02, 2014 1:21 PM >> *To:* [email protected] >> *Subject:* [AFMUG] DNS server for guys who dont want to be gurus >> >> >> >> Is there a good, simple package for locally hosted DNS Servers for people >> like me who dont want to get too far into managing the linux at a granular >> level? we are used to the webmin interface. It would be nice if it had the >> option to set up client accounts for some clients to manage their own DNS >> but not view others, but thats in no way a deal breaker >> >> >> >> -- >> >> All parts should go together without forcing. You must remember that the >> parts you are reassembling were disassembled by you. Therefore, if you >> can't get them together again, there must be a reason. By all means, do not >> use a hammer. -- IBM maintenance manual, 1925 >> >> >> >> >> >> -- >> >> All parts should go together without forcing. You must remember that the >> parts you are reassembling were disassembled by you. Therefore, if you >> can't get them together again, there must be a reason. By all means, do not >> use a hammer. -- IBM maintenance manual, 1925 >> > > > > -- > All parts should go together without forcing. You must remember that the > parts you are reassembling were disassembled by you. Therefore, if you > can't get them together again, there must be a reason. By all means, do not > use a hammer. -- IBM maintenance manual, 1925 > -- All parts should go together without forcing. You must remember that the parts you are reassembling were disassembled by you. Therefore, if you can't get them together again, there must be a reason. By all means, do not use a hammer. -- IBM maintenance manual, 1925
