If you turn Airmax off on your UBNT AP's you can slowly swap all CPE's to Epmp then change AP to Epmp that is what wifi mode is for
— Sent from Mailbox On Wed, Oct 8, 2014 at 10:29 PM, Paul McCall via Af <[email protected]> wrote: > What is the perceived application for the SM operating in standard WiFi mode ? > From: Af [mailto:[email protected]] On Behalf Of Sriram Chaturvedi via Af > Sent: Wednesday, October 08, 2014 7:09 PM > To: [email protected] > Subject: [AFMUG] New ePMP Beta Software 2.3-RC10 available! > Folks, > ePMP Beta software 2.3-RC10 is now available for download here: > https://support.cambiumnetworks.com/files/epmp > System Release 2.3 adds the following features: > * 5 MHz and 10 MHz channel bandwidth support > o Max number of subscribers is limited to 30 for 5MHz and 60 for 10 MHz > * SM Wi-Fi mode support (Only 20 MHz and 40 MHz channel bandwidths) > o SM can operate in standard Wi-Fi mode > * Broadcast Traffic Shaping (Limiting) > o Ability to limit the number of broadcast packets per second > * Multicast VLAN and Prioritization > o Multicast VLAN support with prioritization > o Ability to leave/join multicast groups and limit number of multicast > groups to up to 5 groups > o Support for IGMPv3 snooping > * CLI access via ssh (default credentials: admin/admin) > * Option to set SM Max Tx power manually > Please post any feedback on the ePMP Beta Forum! > http://epmpbeta.community.cambiumnetworks.com/ > Thanks, > Sriram
