So long as the oids dont change when there is a firmware update like
some other I know.
On 10/8/2014 6:05 PM, m0sia via Af wrote:
Not sure if you've seen this one, but here are the templates:
https://github.com/m0sia/cacti-ePMP
I made them some times ago. I am ok to get a free beer on wispapalooza
if the offer is still valid.
Regards,
Dima
On Thu, Oct 2, 2014 at 10:03 PM, Bill Prince via Af <[email protected]
<mailto:[email protected]>> wrote:
Move the RSSI to a separate graph (because it's negative). Takes
resolution away from the positive numbers. Or, you can bias it
relative to a value (like -80 for instance). That way -65 would
show up as 15 (relative to -80). The closer it is to 0, the more
marginal the link. If it goes negative, then you know you're in
the dudu.
bp
On 10/2/2014 8:49 AM, Nicholas Eastman via Af wrote:
As promised, here is my very basic SM Host template.
Copy the snmp_queries to your server and import the host template.
Nicholas Eastman
Royell Communications, Inc.
(217) 965-3699
1-877-400-9319
[email protected] <mailto:[email protected]>
On Wed, Oct 1, 2014 at 1:26 PM, Nicholas Eastman via Af
<[email protected] <mailto:[email protected]>> wrote:
I just set up a basic one the other day. It grabs RSSI, SNR,
MCS rates in the default graph. I have a separate graph
template that appears to be polling traffic rates correctly
as well. (ePMP doesn't report from the standard interface
table). I'm out working at a tower site today, but will post
the template asap, so you can take a look.
On Wednesday, October 1, 2014, Eric Kuhnke via Af
<[email protected] <mailto:[email protected]>> wrote:
Could we get one of the Cambium people who watch this
list to copy/paste a full (numeric) snmpwalk from an
ePMP? I'm curious to see what OIDs it exposes and what
format it returns the data in. Need to figure out how
much data massaging will be necessary via Cacti CDEF
(RPN!) to chart an ePMP in a useful fashion.
On Wed, Oct 1, 2014 at 10:06 AM, Adam Moffett via Af
<[email protected]> wrote:
They mentioned that in Albany. It was mentioned
along the lines of, "I have no idea why our product
doesn't already do that". I don't recall whether
they said it was on the roadmap or not.
Not that kind of compatibility.
What I'm thinking of is where I could replace an
existing 802.11 AP with an ePMP AP, and have
existing 802.11 clients connect without having to
do a truck roll to every client. At least not
right away.
bp
On 10/1/2014 9:57 AM, SmarterBroadband via Af wrote:
At the ePMP training day I went on they said
FSK sync compatibility was high on there list.
-----Original Message-----
From: Af [mailto:[email protected]] On
Behalf Of Bill Prince via Af
Sent: Wednesday, October 01, 2014 9:44 AM
To: [email protected]
Subject: Re: [AFMUG] Cacti Template for ePMP?
Not yet. We are not on the ePMP bandwagon
yet. I've got a couple of sites that I would
consider it for when it comes time to split
existing
802.11 sectors we have, but compatibility
concerns are holding me back.
bp
On 10/1/2014 8:57 AM, Matt Jenkins via Af wrote:
Has anyone made and willing to share a
cacti template for ePMP?
--
Nicholas Eastman
Royell Communications, Inc.
(217) 965-3699
1-877-400-9319
[email protected] <mailto:[email protected]>
--
