Are the services running or are they completely down?
service lappstackApache status service lappstackPostgreSQL status service cnsserver status If the Apache server isn’t started at all there are some logs specifically for it in <install_dir/stack/apacke2/logs. error.log might have some information that would point to what is preventing it from starting up (blocked port, permission issue, ect.) If it is started, check both the HTTP and HTTPS login pages in case the browser auto-completed to the wrong one. For HTTPS it will likely give you a warning about the certificate being self-signed. -Jordan From: Af [mailto:[email protected]] On Behalf Of Mike Hammett via Af Sent: Monday, November 03, 2014 12:02 PM To: [email protected] Subject: Re: [AFMUG] CNS 1.2 Beta *sigh* I had an attachment with various command outputs, but it is lost... ----- Mike Hammett Intelligent Computing Solutions http://www.ics-il.com [Image removed by sender.]<https://www.facebook.com/ICSIL>[Image removed by sender.]<https://plus.google.com/+IntelligentComputingSolutionsDeKalb>[Image removed by sender.]<https://www.linkedin.com/company/intelligent-computing-solutions>[Image removed by sender.]<https://twitter.com/ICSIL> ________________________________ From: "Mike Hammett via Af" <[email protected]> To: [email protected] Sent: Monday, November 3, 2014 11:59:19 AM Subject: Re: [AFMUG] CNS 1.2 Beta Server was up, but when I went to do anything, it just reported that the backend wasn't running. I rebooted. Now it doesn't respond on the web interface. Ideas? ----- Mike Hammett Intelligent Computing Solutions http://www.ics-il.com [Image removed by sender.]<https://www.facebook.com/ICSIL>[Image removed by sender.]<https://plus.google.com/+IntelligentComputingSolutionsDeKalb>[Image removed by sender.]<https://www.linkedin.com/company/intelligent-computing-solutions>[Image removed by sender.]<https://twitter.com/ICSIL> ________________________________ From: "Mike Hammett via Af" <[email protected]> To: [email protected] Sent: Monday, November 3, 2014 11:15:44 AM Subject: Re: [AFMUG] CNS 1.2 Beta "2. If the server is already 64 bit (Windows Server), uninstall the older version of the CNS Server" Since it's not mentioned in the documentation, I found it on the Cambium forum, "/opt/cnsserver/uninstall". ----- Mike Hammett Intelligent Computing Solutions http://www.ics-il.com [Image removed by sender.]<https://www.facebook.com/ICSIL>[Image removed by sender.]<https://plus.google.com/+IntelligentComputingSolutionsDeKalb>[Image removed by sender.]<https://www.linkedin.com/company/intelligent-computing-solutions>[Image removed by sender.]<https://twitter.com/ICSIL> ________________________________ From: "Mike Hammett via Af" <[email protected]> To: [email protected] Sent: Monday, November 3, 2014 10:50:48 AM Subject: Re: [AFMUG] CNS 1.2 Beta I glanced over that as I was running it on a 64 bit install. We'll see how much still applies. ----- Mike Hammett Intelligent Computing Solutions http://www.ics-il.com [Image removed by sender.]<https://www.facebook.com/ICSIL>[Image removed by sender.]<https://plus.google.com/+IntelligentComputingSolutionsDeKalb>[Image removed by sender.]<https://www.linkedin.com/company/intelligent-computing-solutions>[Image removed by sender.]<https://twitter.com/ICSIL> ________________________________ From: "Jordan Stipati via Af" <[email protected]> To: [email protected] Sent: Monday, November 3, 2014 10:49:05 AM Subject: Re: [AFMUG] CNS 1.2 Beta The “CNS Server 1.2 Release Notes” document on the software page includes a section “Data Migration from 32 bit CNS Servers” that contains instructions for upgrading from an existing installation. https://support.cambiumnetworks.com/files/cnss/ -Jordan From: Af [mailto:[email protected]] On Behalf Of Mike Hammett via Af Sent: Monday, November 03, 2014 10:44 AM To: [email protected] Subject: Re: [AFMUG] CNS 1.2 Beta Your guides might want to include instructions for people upgrading from previous versions instead of new installs. ----- Mike Hammett Intelligent Computing Solutions http://www.ics-il.com [Image removed by sender.]<https://www.facebook.com/ICSIL>[Image removed by sender.]<https://plus.google.com/+IntelligentComputingSolutionsDeKalb>[Image removed by sender.]<https://www.linkedin.com/company/intelligent-computing-solutions>[Image removed by sender.]<https://twitter.com/ICSIL> ________________________________ From: "Jordan Stipati via Af" <[email protected]<mailto:[email protected]>> To: [email protected]<mailto:[email protected]> Sent: Monday, November 3, 2014 10:39:22 AM Subject: Re: [AFMUG] CNS 1.2 Beta Mike, The latest version on the web site is 1.2.19.2979. There’s been significant work since the 1.2.13 beta version. There’s also a hotfix for 1.2.19 available that adds the ability to install support for newer versions of ePMP firmware in the form of CND file. I recommend you upgrade to the latest version on the web site and install the hot fix as well to see if that addresses the issue you’re seeing. Regards, Jordan Stipati Senior Engineer - Software Cambium Networks E: [email protected]<mailto:[email protected]> www.cambiumnetworks.com<http://www.cambiumnetworks.com/> [Image removed by sender. v_large_blue_noBG.png] From: Af [mailto:[email protected]] On Behalf Of Mike Hammett via Af Sent: Saturday, November 01, 2014 12:12 PM To: [email protected]<mailto:[email protected]> Subject: Re: [AFMUG] CNS 1.2 Beta It seems like I can't do anything in the 10.1.255.0/24 network either. Is the version posted on the web site newer than the version I have (1.2.13.2856)? ----- Mike Hammett Intelligent Computing Solutions http://www.ics-il.com [Image removed by sender.]<https://www.facebook.com/ICSIL>[Image removed by sender.]<https://plus.google.com/+IntelligentComputingSolutionsDeKalb>[Image removed by sender.]<https://www.linkedin.com/company/intelligent-computing-solutions>[Image removed by sender.]<https://twitter.com/ICSIL> ________________________________ From: "Mike Hammett" <[email protected]<mailto:[email protected]>> To: [email protected]<mailto:[email protected]> Sent: Monday, June 16, 2014 2:16:52 PM Subject: Re: [AFMUG] CNS 1.2 Beta 10.10.0.1 through 10.10.254.254 seemed to work out just fine. ----- Mike Hammett Intelligent Computing Solutions http://www.ics-il.com ________________________________ From: "Jordan Stipati" <[email protected]<mailto:[email protected]>> To: [email protected]<mailto:[email protected]> Sent: Monday, June 16, 2014 2:10:29 PM Subject: RE: [AFMUG] CNS 1.2 Beta The last octet disallowing 0 is only for IP address ranges (start IP through end IP). 255.255.x.y and /16 slash notation (when it is fixed) allows 0. 255 is also disallowed for the last octet for IP address ranges only. I was able to start a discover on my setup using Start IP: 10.10.0.0 and Subnet Mask: 255.255.0.0 successfully. For all the other examples you gave I also got a red flash or pop-up error when saving. If I changed the Start IP value from 10.10.0.0 to 10.10.0.1 I was able to use the following End IP addresses: • 10.10.254.254 • 10.10.10.254 • 10.10.0.254 This leave the following examples you gave as not working due to 255 being in one of the octets. 10.10.255.255, 10.10.10.255, 10.10.0.255. I am characterizing this behavior on our side so we can take a closer look at things to make the system easier to use. Please let us know if you’re able to get an IP range working by starting at 10.10.0.1. Thanks, Jordan From: [email protected]<mailto:[email protected]> [mailto:[email protected]] On Behalf Of Mike Hammett Sent: Monday, June 16, 2014 11:48 AM To: [email protected]<mailto:[email protected]> Subject: Re: [AFMUG] CNS 1.2 Beta The cell flashes red. Start of 10.10.0.0 and I haven't found an end IP that doesn't flash red. I also tested other start IPs. I first tried an end of 10.10.255.255, 10.10.254.254, 10.10.10.255, 10.10.10.254, 10.10.0.255, 10.10.0.254 and probably some others. I did not try 255.255.0.0 notation, I'll report back as to how that works. I did delete and create new to no further advancement. Hrmmm... So the last octet of the first IP should not be zero, despite proper network notation being (for instance) 10.10.0.0/16? I'll give a try with a non-zero last octet. ----- Mike Hammett Intelligent Computing Solutions http://www.ics-il.com ________________________________ From: "Jordan Stipati" <[email protected]<mailto:[email protected]>> To: [email protected]<mailto:[email protected]> Sent: Monday, June 16, 2014 11:17:08 AM Subject: RE: [AFMUG] CNS 1.2 Beta Hi Mike, Sorry to hear you’re having problems. I verified on our side and yes, it looks like we’re not handling /xx bitmask notation properly. I’ve logged a ticket into our system to fix this. 255.255.x.y notation and start/end IP address ranges should work though. When you enter an end IP are you getting a pop-up error or is the cell flashing red? Also, what are the exact values you are trying to enter for the Start IP and End IP fields? Deleting the existing row and creating a new row fresh may help. Also, when using a start/end IP range the last octet of the Start IP should not be 0. Thanks, Jordan Stipati Senior Engineer - Software Cambium Networks 3800 Golf Rd, Suite 360 Rolling Meadows, IL 60008 E: [email protected]<mailto:[email protected]> www.cambiumnetworks.com<http://www.cambiumnetworks.com/> [Image removed by sender. v_large_blue_noBG.png] From: [email protected]<mailto:[email protected]> [mailto:[email protected]] On Behalf Of Mike Hammett Sent: Sunday, June 15, 2014 4:06 PM To: [email protected]<mailto:[email protected]> Subject: [AFMUG] CNS 1.2 Beta Has anyone gotten discovery to accept anything? I put in a /16, it completes discovery instantaneously and reports 0 devices searched. I try to put in an end IP, heck even a range much smaller than /16 and it won't accept that field. I also love how the old versions were only 32 bit, the new version is only 64 bit, there will be no upgrading to anything from the current beta. ----- Mike Hammett Intelligent Computing Solutions http://www.ics-il.com
