Naw, the would make you into pozole (cook you with lye in a 55 gallon barrel, nothing is left).
From: That One Guy via Af Sent: Tuesday, November 11, 2014 9:42 AM To: [email protected] Subject: Re: [AFMUG] UBNT in mexico Is the 3ghz band usable in mexico? What are their rules? I would configure this stuff per their regulations as I dont want to end up naked, headless and dangling from a bridge On Fri, Nov 7, 2014 at 3:03 PM, Jaime Solorza via Af <[email protected]> wrote: Yes. You have to NOM and certificate of origin paper work. Everyone and their abuelita use Ubiquiti in compliance test mode as well as MT and Canopy with engineering extension. SCT rules mirror FCC but few comply. Jaime Solorza On Nov 7, 2014 1:51 PM, "That One Guy via Af" <[email protected]> wrote: One of the partners has been talking to some people from an orphanage around Magdalena Mexico about a PMP solution, campus type environment, UBNT budget, 20ish subscribers and one, maybe two AP sectors. Im not sure what, if any regulations apply down there, I told him the 5ghz solution probably offers them the broadest options as far as channel availabiltiy, but I dont know what theyre allowed to use down there, here it would be grand, since most of the subscribers are withing 2000 feet so power isnt really a concern The budget is a limited budget for sure, The AC line may be out of the budget, I dont know how much difference in cost between that and the M5 line there is. First, is anybody on here from around there Second, it would be great if there happened to be somebody dumping UBNT gear in a forklift upgrade that would be willing to part with gear on the cheap, assuming sending it to mexico doesnt have some customs limitation -- All parts should go together without forcing. You must remember that the parts you are reassembling were disassembled by you. Therefore, if you can't get them together again, there must be a reason. By all means, do not use a hammer. -- IBM maintenance manual, 1925 -- All parts should go together without forcing. You must remember that the parts you are reassembling were disassembled by you. Therefore, if you can't get them together again, there must be a reason. By all means, do not use a hammer. -- IBM maintenance manual, 1925
