Border Patrol shows video of that to HS kids each year Jaime Solorza On Nov 11, 2014 9:45 AM, "Chuck McCown via Af" <[email protected]> wrote:
> Naw, the would make you into pozole (cook you with lye in a 55 gallon > barrel, nothing is left). > > *From:* That One Guy via Af <[email protected]> > *Sent:* Tuesday, November 11, 2014 9:42 AM > *To:* [email protected] > *Subject:* Re: [AFMUG] UBNT in mexico > > Is the 3ghz band usable in mexico? What are their rules? > I would configure this stuff per their regulations as I dont want to end > up naked, headless and dangling from a bridge > > On Fri, Nov 7, 2014 at 3:03 PM, Jaime Solorza via Af <[email protected]> wrote: > >> Yes. You have to NOM and certificate of origin paper work. Everyone and >> their abuelita use Ubiquiti in compliance test mode as well as MT and >> Canopy with engineering extension. SCT rules mirror FCC but few comply. >> >> Jaime Solorza >> On Nov 7, 2014 1:51 PM, "That One Guy via Af" <[email protected]> wrote: >> >>> One of the partners has been talking to some people from an orphanage >>> around Magdalena Mexico about a PMP solution, campus type environment, UBNT >>> budget, 20ish subscribers and one, maybe two AP sectors. >>> >>> Im not sure what, if any regulations apply down there, I told him the >>> 5ghz solution probably offers them the broadest options as far as channel >>> availabiltiy, but I dont know what theyre allowed to use down there, here >>> it would be grand, since most of the subscribers are withing 2000 feet so >>> power isnt really a concern >>> >>> The budget is a limited budget for sure, The AC line may be out of the >>> budget, I dont know how much difference in cost between that and the M5 >>> line there is. >>> >>> First, is anybody on here from around there >>> Second, it would be great if there happened to be somebody dumping UBNT >>> gear in a forklift upgrade that would be willing to part with gear on the >>> cheap, assuming sending it to mexico doesnt have some customs limitation >>> >>> -- >>> All parts should go together without forcing. You must remember that the >>> parts you are reassembling were disassembled by you. Therefore, if you >>> can't get them together again, there must be a reason. By all means, do not >>> use a hammer. -- IBM maintenance manual, 1925 >>> >> > > > -- > All parts should go together without forcing. You must remember that the > parts you are reassembling were disassembled by you. Therefore, if you > can't get them together again, there must be a reason. By all means, do not > use a hammer. -- IBM maintenance manual, 1925 >
