This is going to have limited use the U.S.. Unfortunately , with tax credits for certain type of windows and window films, most of our windows don’t work well with indoor radios. We did a test one day and found that it was easier to get the signal through red brick than the window it surrounded.
However, we have been installing 2.4GHz radios in windows in pre-built homes very successfully since they don’t have tinting. On another note, it’s also why you don’t want to put your radar detector on the top of the windshield. Rory From: Af [mailto:[email protected]] On Behalf Of Mike Hammett via Af Sent: Wednesday, November 12, 2014 6:17 AM To: [email protected] Subject: Re: [AFMUG] Mimosa did it again This is better than previous attempts in that it's a beamforming antenna on the CPE. It shapes the beam to point at the best signal it sees. ----- Mike Hammett Intelligent Computing Solutions http://www.ics-il.com <https://www.facebook.com/ICSIL> <https://plus.google.com/+IntelligentComputingSolutionsDeKalb> <https://www.linkedin.com/company/intelligent-computing-solutions> <https://twitter.com/ICSIL> ________________________________ From: "Jason McKemie via Af" <[email protected]> To: [email protected] Sent: Wednesday, November 12, 2014 2:25:25 AM Subject: Re: [AFMUG] Mimosa did it again Allowing customers to install their own CPE is a bad idea in any unlicensed frequency, both for your network as well as the spectrum in general. On Wednesday, November 12, 2014, Stefan Englhardt via Af <[email protected]> wrote: Now Mimosa announced an indoor window mountable CPE: „Mimosa's C5i just changed urban Internet forever! Never wait on your service provider install again. Self-install in seconds and experience 500+ Mbps!“ To the mimosa Fans: How they change physics to make 5GHz penetrate through windows. We have not much luck doing this with 3,5GHz licensed, beamforming and high power.
