The APs can be synchronized for time/date/timezone; just have 'scheduled full SA' as an option.
-----Original Message----- From: Af [mailto:[email protected]] On Behalf Of Matt via Af Sent: Wednesday, December 3, 2014 7:15 PM To: [email protected] Subject: Re: [AFMUG] 13.3 Open Beta > The way Sector SA is being implemented won’t give the > best possible results in practice. Since it is not paying attention to > the sync pulses, but just coordinating running an AP spectrum scan > with the SMs you are still going to see a bunch of bogus energy from > co-located access points. In order to do this in a way where you can > really see what the My thought is to open 4 tabs in my web browser and run all the AP's in cluster at one time. Is there an SNMP command to do this? Would be nice to run a system wide SA every few months. Could not open enough tabs to do this but would be easy with a perl script and SNMP. Would be nice to be able to retrieve the results with SNMP as well. > spectrum looks like, the AP should only perform SA during its > appointed receive windows and not during the TX windows of other co-located > equipment. > > > Another side effect for those of us running fancy beam > forming antenna arrays is we can never use ‘Sector SA’ at all, since > it is Where do you get 'beam forming antenna's for 450 gear? > listening during the TX windows of other access points connected to > the beam former and getting high RF levels shoved into its RX side. >
