All the different timing products, Packetflux, CTM, CMM have compatible
timing. There are differences, but they differences are tiny. However,
I would sync all co-located devices to the fewest number of devices you
can deal with. We are not 100% this way, and we've gotten away with it
for the most part. BUT, timing problems are a royal PITA to troubleshoot.
--
bp
<part {dash} 15 {at} SkylineBroadbandService {dot} com>
On 12/3/2014 10:57 AM, Mark Radabaugh via Af wrote:
I’m going to try this out as soon as I can get a 450AP 3.65 on the site.
Question - the comment about CMM timing source. Was this ‘it works
best if all devices have the same timing source’ or is there something
specific to the CMM itself? Is ask because we usually use LMG CTM’s
at these sites. The timing all comes from the same timing source,
but it’s not your CMM.
Mark
On Dec 3, 2014, at 1:13 PM, Rajesh Vijayakumar via Af <[email protected]
<mailto:[email protected]>> wrote:
We are looking specifically for beta coverage on PMP320 co-location.
If anyone is trying this or have specific questions, please let us
know. You can also contact me off-list at
[email protected]
<mailto:[email protected]>.
Rajesh Vijayakumar
Cambium Networks
On Wed, Dec 3, 2014 at 10:44 AM, Jonathan Mandziara via Af
<[email protected] <mailto:[email protected]>> wrote:
AF Community,
Please visit the Cambium Networks webpage to down load the Open
Beta version of 13.3 for PMP450 and PTP450 radios.
https://support.cambiumnetworks.com/files/pmp450/beta
https://support.cambiumnetworks.com/files/ptp450/beta
* PMP320 Co-location (5ms Frame support) (This will work on all
bands, but intended for 3.5 and 3.65 at this time.)
* 7MHz Channel Bandwidth for 3.5 and 3.65 radios
* Removal of the PTP450 Map for faster link speeds
* SNMPv3
* HTTPS
* Ability to turn off Telnet, FTP and TFTP
* Read-Only Accounts for Admin, Install, and Tech
* Sector SA
* Export of Sessions Status Page
* Config File export/Import for AP/BHM and SM/BHS
*NOTE:* PMP320 co-location works best when both the PMP450 and
PMP320 are on CMM synch sources. Cambium is writing a paper on
how to adjust the radios to best deal with other synch sources,
although the radios will still work together without adjustment
with some impact to throughput.
We look forward to you feedback on this release either in this
forum or at:
http://community.cambiumnetworks.com/t5/PMP-Beta/bd-p/forums_pmp_beta
Best,
C*a*mbium Jonathan
