You don't? :)
josh reynolds :: chief information officer
spitwspots :: www.spitwspots.com
On 12/05/2014 01:01 PM, Josh Luthman via Af wrote:
You must have a lot of noise in 2.4!
Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373
On Fri, Dec 5, 2014 at 4:58 PM, Sean Heskett via Af <[email protected]
<mailto:[email protected]>> wrote:
https://support.cambiumnetworks.com/files/epmp/
scroll down and grab these two documents..they explain everything
in detail
ePMP ABAB frequency reuse deployment
ePMP Configuration in a Frequency Reuse Deployment
we are using 20Mhz channels. currently have about 10 subs per AP
(adding more each day) after about 3-5 subs per AP we started to
notice some problems and reconfigured the APs per these guides and
now everything is working as expected. one of the main things was
changing the "Subscriber Module Target Receive Level" to -50.
On Fri, Dec 5, 2014 at 2:50 PM, Josh Reynolds via Af <[email protected]
<mailto:[email protected]>> wrote:
Can you explain what their instructions are, or point me in
the right direction?
How many subs do you have connected to this 2.4 cluster?
Channel widths? Thanks.
josh reynolds :: chief information officer
spitwspots ::www.spitwspots.com <http://www.spitwspots.com>
On 12/05/2014 12:41 PM, Sean Heskett via Af wrote:
yes only 3 APs so we are doing ABA
but my point with the ABAB guide is that if you follow their
instructions it works great, if you deviate...then you can
have issues.
On Fri, Dec 5, 2014 at 2:36 PM, Josh Luthman via Af
<[email protected] <mailto:[email protected]>> wrote:
You mean four APs? That would be ABAB.
Three APs would be ABA.
Josh Luthman
Office: 937-552-2340 <tel:937-552-2340>
Direct: 937-552-2343 <tel:937-552-2343>
1100 Wayne St
Suite 1337
Troy, OH 45373
On Fri, Dec 5, 2014 at 4:34 PM, Sean Heskett via Af
<[email protected] <mailto:[email protected]>> wrote:
i have a tower with 3 2.4Ghz APs using 2 channels.
works great as long as you follow the freq reuse and
ABAB deployment guides on the cambium epmp website.
On Fri, Dec 5, 2014 at 2:06 PM, Josh Reynolds via Af
<[email protected] <mailto:[email protected]>> wrote:
Anybody have ePMP setup and working in the field
for freq reuse? Can you share some info about it?
Speeds, number of subs per AP, etc.
Thanks
--
josh reynolds :: chief information officer
spitwspots ::www.spitwspots.com <http://www.spitwspots.com>
