i think the problem was more that the SMs were receiving at -45 to -55 but the AP was setting their Tx to -60 and caused upload problems (which in turn caused downlink problems) setting the AP to tell the SMs to come in at -50 cleaned everything up.
that and yes 2.4 is a hot mess with the noise floor :-/ On Fri, Dec 5, 2014 at 3:20 PM, Josh Luthman via Af <[email protected]> wrote: > not so hot that my signals in -60 don't work! > > > Josh Luthman > Office: 937-552-2340 > Direct: 937-552-2343 > 1100 Wayne St > Suite 1337 > Troy, OH 45373 > > On Fri, Dec 5, 2014 at 5:17 PM, Josh Reynolds via Af <[email protected]> wrote: > >> You don't? :) >> >> josh reynolds :: chief information officer >> spitwspots :: www.spitwspots.com >> >> On 12/05/2014 01:01 PM, Josh Luthman via Af wrote: >> >> You must have a lot of noise in 2.4! >> >> >> Josh Luthman >> Office: 937-552-2340 >> Direct: 937-552-2343 >> 1100 Wayne St >> Suite 1337 >> Troy, OH 45373 >> >> On Fri, Dec 5, 2014 at 4:58 PM, Sean Heskett via Af <[email protected]> wrote: >> >>> https://support.cambiumnetworks.com/files/epmp/ >>> >>> scroll down and grab these two documents..they explain everything in >>> detail >>> ePMP ABAB frequency reuse deployment >>> ePMP Configuration in a Frequency Reuse Deployment >>> >>> we are using 20Mhz channels. currently have about 10 subs per AP >>> (adding more each day) after about 3-5 subs per AP we started to notice >>> some problems and reconfigured the APs per these guides and now everything >>> is working as expected. one of the main things was changing the "Subscriber >>> Module Target Receive Level" to -50. >>> >>> >>> >>> >>> On Fri, Dec 5, 2014 at 2:50 PM, Josh Reynolds via Af <[email protected]> >>> wrote: >>> >>>> Can you explain what their instructions are, or point me in the right >>>> direction? >>>> >>>> How many subs do you have connected to this 2.4 cluster? Channel >>>> widths? Thanks. >>>> >>>> josh reynolds :: chief information officer >>>> spitwspots :: www.spitwspots.com >>>> >>>> On 12/05/2014 12:41 PM, Sean Heskett via Af wrote: >>>> >>>> yes only 3 APs so we are doing ABA >>>> >>>> but my point with the ABAB guide is that if you follow their >>>> instructions it works great, if you deviate...then you can have issues. >>>> >>>> >>>> >>>> On Fri, Dec 5, 2014 at 2:36 PM, Josh Luthman via Af <[email protected]> >>>> wrote: >>>> >>>>> You mean four APs? That would be ABAB. >>>>> >>>>> Three APs would be ABA. >>>>> >>>>> >>>>> Josh Luthman >>>>> Office: 937-552-2340 >>>>> Direct: 937-552-2343 >>>>> 1100 Wayne St >>>>> Suite 1337 >>>>> Troy, OH 45373 >>>>> >>>>> On Fri, Dec 5, 2014 at 4:34 PM, Sean Heskett via Af <[email protected]> >>>>> wrote: >>>>> >>>>>> i have a tower with 3 2.4Ghz APs using 2 channels. >>>>>> >>>>>> works great as long as you follow the freq reuse and ABAB >>>>>> deployment guides on the cambium epmp website. >>>>>> >>>>>> >>>>>> >>>>>> On Fri, Dec 5, 2014 at 2:06 PM, Josh Reynolds via Af <[email protected]> >>>>>> wrote: >>>>>> >>>>>>> Anybody have ePMP setup and working in the field for freq reuse? >>>>>>> Can you share some info about it? Speeds, number of subs per AP, etc. >>>>>>> >>>>>>> Thanks >>>>>>> >>>>>>> -- >>>>>>> josh reynolds :: chief information officer >>>>>>> spitwspots :: www.spitwspots.com >>>>>>> >>>>>>> >>>>>> >>>>> >>>> >>>> >>> >> >> >
