Scott,
Have a look at the slave side spectrum manager and see if there is
some noise cropping up.
If not then you may have some water in a pigtail or defective. Also, may
want to do a site walk to see if the antennas may have moved due to
weather or something in the path since it was installed.
More often then not the tale tale signature if a bad pig tail is the
vector error is all over the place.
These things usually dont have grey area when it comes to detailed
informational tags like "Limited by WIRELESS conditions"
Start with spectrum manager and see what it says then look at Diag
plotter for unusual patterns in vector corrections.
On 12/12/2014 03:54 PM, Scott Vander Dussen via Af wrote:
I�m diagnosing a slow throughput PTP500 link remotely. This link�s
real-world capacity is only about 2mb/s. Attached is screenshots of
the status page. Anything stick out as weird or wrong? It was on
15mb/s channels, I tried 10mb/s � there�s plenty of clean spectrum.
It�s not making sense to me that this is only able to move 2mb/s.
Thanks,
Scott
