Im talking about the stock power supplies, we are moving to syncinjectors for most stuff, but the power supplies for those need to be mounted somewhere and theyre cheaper than DIN mount DC power supplies. and then there are one offs, we put up a site saturday with all the APs powered from syncinjectors but the one backhaul is a rocket so its got a power supply already. Most of that type can be powered from a toughswitch, but not all sites that have ubnt have a toughswitch.
Im looking for mounting what we have, not changing what we have On Mon, Dec 15, 2014 at 11:26 AM, George Skorup (Cyber Broadcasting) via Af <[email protected]> wrote: > Uhh, DIN rail power supplies? > > On 12/15/2014 11:20 AM, That One Guy via Af wrote: > > anybody have a cheap universal solution for the different size power > supplies and poe injectors? > > I finally have a mix of rack and DIN in our enclosures to handle most of > the gear keeping it pretty, but the power supplies are the problem now. > Velcro is good, but they tend to slide out. Zip ties are perfect, except in > a pinch nobody has them or uses them and just throws power supplies in the > box loose. > > -- > All parts should go together without forcing. You must remember that the > parts you are reassembling were disassembled by you. Therefore, if you > can't get them together again, there must be a reason. By all means, do not > use a hammer. -- IBM maintenance manual, 1925 > > > -- All parts should go together without forcing. You must remember that the parts you are reassembling were disassembled by you. Therefore, if you can't get them together again, there must be a reason. By all means, do not use a hammer. -- IBM maintenance manual, 1925
