Amazon
Matthew Jenkins
SmarterBroadband
[email protected]
530.272.4000
On 12/15/2014 07:58 PM, Josh Luthman via Af wrote:
Matt,
Where do you get that stuff? Looks great!
Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373
On Dec 15, 2014 8:02 PM, "Matt Jenkins via Af" <[email protected]
<mailto:[email protected]>> wrote:
I use 3M Dual Lock
http://solutions.3m.com/wps/portal/3M/en_US/Adhesives/Tapes/Brands/Dual-Lock-Reclosable-Fasteners/
It works at really low and high temps. Its like velcro but WAY
better. Sticks to anything. You can buy it in long rolls and cut
it to the size you need.
The next step is training everyone to carry it with them when they
go to a site to fix something.
Matthew Jenkins
SmarterBroadband
[email protected] <mailto:[email protected]>
530.272.4000 <tel:530.272.4000>
On 12/15/2014 09:20 AM, That One Guy via Af wrote:
anybody have a cheap universal solution for the different size
power supplies and poe injectors?
I finally have a mix of rack and DIN in our enclosures to
handle most of the gear keeping it pretty, but the power
supplies are the problem now. Velcro is good, but they tend to
slide out. Zip ties are perfect, except in a pinch nobody has
them or uses them and just throws power supplies in the box loose.
--
All parts should go together without forcing. You must
remember that the parts you are reassembling were disassembled
by you. Therefore, if you can't get them together again, there
must be a reason. By all means, do not use a hammer. -- IBM
maintenance manual, 1925
