... 5ghz, I forgot these arent real 3ghz. I wonder if this hotspot is an AC device
On Thu, Feb 12, 2015 at 1:34 PM, Mathew Howard <[email protected]> wrote: > That sounds similar to something I was seeing a couple months ago... my > guess is that the UBNT radio is picking up 5ghz noise. > > On Thu, Feb 12, 2015 at 1:30 PM, That One Guy <[email protected]> > wrote: > >> Have techs at a customer house right now, its a 9 mile shot on 5mhz >> nanostation, but best we ever see on a speedtest was 3x1 ish at Signal >> Strength: >> >> -68 dBm >> Horizontal / Vertical:-72 / -69 dBm >> Noise Floor:-95 dBm >> Transmit CCQ:87.2 % >> TX/RX Rate:26 Mbps / 29.25 Mbps >> so we ran a spectrum in airview and there is a peak power from >> 3550-3725mhz at -75 alot like what you see with an fhss system >> its air view so i take it with a grain of salt. >> >> he has a verizon hotspot and we shut it off speedtests went consistently >> to 8x4 whic on a populated access point at that channel size with ubnt is >> about what I was expecting. >> >> I did not think there was anything that could use that set of spectrum at >> once, does verizon have some sort of license in that band? >> >> The guys are still troubleshooting so it could be a coincidental thing >> that it started working >> >> >> >> -- >> All parts should go together without forcing. You must remember that the >> parts you are reassembling were disassembled by you. Therefore, if you >> can't get them together again, there must be a reason. By all means, do not >> use a hammer. -- IBM maintenance manual, 1925 >> > > -- All parts should go together without forcing. You must remember that the parts you are reassembling were disassembled by you. Therefore, if you can't get them together again, there must be a reason. By all means, do not use a hammer. -- IBM maintenance manual, 1925
