Hi, This comes from the ePMP User Guide.
Dan ePMP Software Manager ************** If Device IP address Mode is set to DHCP and the device is unable to retrieve IP address information via DHCP, the device management IP is set to fallback IP 192.168.0.1 (AP mode), 192.168.0.2 (SM mode), 192.168.0.3 (Spectrum Analyzer mode) or the previously-configured static Device IP Address. Units may always be accessed via the Ethernet port. With Release 2.1, the fallback IP address has changed from 10.1.1.254 to 169.254.1.1. From: Af [mailto:[email protected]] On Behalf Of Josh Luthman Sent: Friday, February 13, 2015 2:53 PM To: [email protected] Subject: Re: [AFMUG] epmp question You'll need to set static arp if you don't get the right device initially. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Feb 13, 2015 3:50 PM, "Jerry Head" <[email protected]<mailto:[email protected]>> wrote: 169.254.1.1 is supposed to work with firmware 2.3 and up I believe... On 2/13/2015 2:47 PM, CBB - Jay Fuller wrote: � so - if we use DHCP to assign an EPMP a management address ; but then we go into spectrum locally and lose access to the radio - what is the "fallback ip" if it doesn't get a DHCP address?�� Is there one?�� Oops! � � 169.254.1.1 is supposed to work with firmware 2.3 and up I believe...
