We have a winner. 192.168.0.3. Luckily, I saw the message pop up on the
second try after defaulting the radio. And be sure you have Java
installed. Apparently, my recently reloaded field unit didn't have it.
Dan Sullivan wrote:
Hi,
This comes from the ePMP User Guide.
Dan
ePMP Software Manager
**************
If *Device IP address Mode* is set to *DHCP* and the device is unable
to retrieve IP address information via DHCP, the device management IP
is set to fallback IP 192.168.0.1 (AP mode), 192.168.0.2 (SM mode),
192.168.0.3 (Spectrum Analyzer mode) or the previously-configured
static Device IP Address. Units may always be accessed via the
Ethernet port.
With Release 2.1, the fallback IP address has changed from 10.1.1.254
to 169.254.1.1.
*From:*Af [mailto:[email protected]] *On Behalf Of *Josh Luthman
*Sent:* Friday, February 13, 2015 2:53 PM
*To:* [email protected]
*Subject:* Re: [AFMUG] epmp question
You'll need to set static arp if you don't get the right device initially.
Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373
On Feb 13, 2015 3:50 PM, "Jerry Head" <[email protected]
<mailto:[email protected]>> wrote:
169.254.1.1 is supposed to work with firmware 2.3 and up I believe...
On 2/13/2015 2:47 PM, CBB - Jay Fuller wrote:
�
so - if we use DHCP to assign an EPMP a management address ; but
then we go into spectrum locally and lose access to the radio -
what is the "fallback ip" if it doesn't get a DHCP address?��
Is there one?�� Oops!
�
�
169.254.1.1 is supposed to work with firmware 2.3 and up I believe...
