On Monday, February 16, 2015, Jason McKemie <
j.mcke...@veloxinetbroadband.com> wrote:
>
>
> On Sunday, February 15, 2015, Ken Hohhof <af...@kwisp.com
> <javascript:_e(%7B%7D,'cvml','af...@kwisp.com');>> wrote:
>
>> Anything earlier than 12.1 needs to be updated to 12.1 first.
>>
>> Then I would read the 430 to 450 migration notes in the 12.2.2 release
>> notes.
>>
>> I believe you can go directly from 12.1 to 13.2. If you change your mind
>> and want to downgrade, I know you can’t go back to 11.2, I don’t remember
>> if you can go back to 12.1, but you don’t want to be stuck on 12.1 anyway.
>> So once you have the 430/450 interop checkboxes on your 430 SMs, I think
>> you are stuck with them, luckily that whole thing seems to have been well
>> thought out. The problem I ran into was having some 430 SMs with 12.2.2
>> and wanting to deploy them on a 430 AP still on 11.2, the AP will not be
>> able to display the signal from those SMs, it will show as NA/NA until you
>> update the AP. But you can’t downgrade the SM back to 11.2.
>>
>>
>> *From:* TJ Trout
>> *Sent:* Sunday, February 15, 2015 6:02 PM
>> *To:* af@afmug.com
>> *Subject:* Re: [AFMUG] Sm needs to be power cycled after interference?
>> 12.1
>>
>> That's a lot of release guides to check
>>
>> On Sun, Feb 15, 2015 at 3:46 PM, Josh Luthman <
>> j...@imaginenetworksllc.com> wrote:
>>
>>> That's a big jump...I'd check the release guides.
>>>
>>> Josh Luthman
>>> Office: 937-552-2340
>>> Direct: 937-552-2343
>>> 1100 Wayne St
>>> Suite 1337
>>> Troy, OH 45373
>>> On Feb 15, 2015 6:46 PM, "TJ Trout" <t...@voltbb.com> wrote:
>>>
>>>> Can i go 12.1-13.2.1? or do I need to update in steps?
>>>>
>>>> On Sun, Feb 15, 2015 at 11:36 AM, Bill Prince <part15...@gmail.com>
>>>> wrote:
>>>>
>>>>> Update to 13.2 or 13.2.1. There are circumstances where an SM will
>>>>> lose connectivity, and the later SW handles this better.
>>>>>
>>>>> bp
>>>>> <part15sbs{at}gmail{dot}com>
>>>>>
>>>>>
>>>>> On 2/15/2015 10:45 AM, TJ Trout wrote:
>>>>>
>>>>>> I have a 430 site that has been getting interference lately, when the
>>>>>> interference happens some SM's drop off of the Sector and then they won't
>>>>>> reconnect until the customer power cycles their SM, this is on 12.1, is
>>>>>> this a known problem? Really annoying
>>>>>>
>>>>>
>>>>>
>>>>
>>>
>>
>
