Jason,
I seem to be getting empty messages from you. They come in pairs.
bp
<part15sbs{at}gmail{dot}com>
On 2/16/2015 1:17 AM, Jason McKemie wrote:
On Monday, February 16, 2015, Jason McKemie
<[email protected]
<mailto:[email protected]>> wrote:
On Sunday, February 15, 2015, Ken Hohhof <[email protected]
<javascript:_e(%7B%7D,'cvml','[email protected]');>> wrote:
Anything earlier than 12.1 needs to be updated to 12.1 first.
Then I would read the 430 to 450 migration notes in the 12.2.2
release notes.
I believe you can go directly from 12.1 to 13.2. If you change
your mind and want to downgrade, I know you can’t go back to
11.2, I don’t remember if you can go back to 12.1, but you
don’t want to be stuck on 12.1 anyway. So once you have the
430/450 interop checkboxes on your 430 SMs, I think you are
stuck with them, luckily that whole thing seems to have been
well thought out. The problem I ran into was having some 430
SMs with 12.2.2 and wanting to deploy them on a 430 AP still
on 11.2, the AP will not be able to display the signal from
those SMs, it will show as NA/NA until you update the AP. But
you can’t downgrade the SM back to 11.2.
*From:* TJ Trout
*Sent:* Sunday, February 15, 2015 6:02 PM
*To:* [email protected]
*Subject:* Re: [AFMUG] Sm needs to be power cycled after
interference? 12.1
That's a lot of release guides to check
On Sun, Feb 15, 2015 at 3:46 PM, Josh Luthman
<[email protected]> wrote:
That's a big jump...I'd check the release guides.
Josh Luthman
Office: 937-552-2340 <tel:937-552-2340>
Direct: 937-552-2343 <tel:937-552-2343>
1100 Wayne St
Suite 1337
Troy, OH 45373
On Feb 15, 2015 6:46 PM, "TJ Trout" <[email protected]> wrote:
Can i go 12.1-13.2.1? or do I need to update in steps?
On Sun, Feb 15, 2015 at 11:36 AM, Bill Prince
<[email protected]> wrote:
Update to 13.2 or 13.2.1. There are circumstances
where an SM will lose connectivity, and the later
SW handles this better.
bp
<part15sbs{at}gmail{dot}com>
On 2/15/2015 10:45 AM, TJ Trout wrote:
I have a 430 site that has been getting
interference lately, when the interference
happens some SM's drop off of the Sector and
then they won't reconnect until the customer
power cycles their SM, this is on 12.1, is
this a known problem? Really annoying
