Out of 90 radios from nanostation loco M5s to nanobeam M5 300s to rockets and everything in between that I've upgraded to XW 5.5.10 I've had issues with only two. Both of those two had the exact same issue. I can no longer connect via the LAN port. It will get the PoE just fine, but completely stopped any traffic from going through the LAN port. It won't even show connected on anything anymore. This happened immediately after the upgrade at different times on two different radios, so I can only assume it was the upgrade that caused the issue.
The 5.5.10 opened up the UNI-I band on some radios and dropped the noise floor by more than 10db on all of them. I've had to reboot or even power cycle some customers radios from time to time, but it's pretty stable. I think it's worth the risk to upgrade in most cases. If it breaks, you can always RMA, though I haven't had a chance to with mine yet. Thank you, Brett A Mansfield > On Feb 16, 2015, at 8:49 PM, timothy steele <[email protected]> wrote: > > XM 5.5.10 XW you might want to try beta more so if you are mixing the 2 > > — > Sent from Mailbox > > >> On Mon, Feb 16, 2015 at 10:44 PM, Tyler Treat <[email protected]> >> wrote: >> I'm seeing 5.5.8 and 5.5.10 out there. What do I want? >> Short PTP shot. >
