In this case it was the slave. The master lost all communication to the slave. I also could not access it via Ethernet or the management port. There was power to the unit as the red lights were on and indicated the correct signal level, and the ports indicated a connection. It simply wouldn't do anything at all. A power cycle got it responding again.
Thank you, Brett A Mansfield > On Feb 26, 2015, at 9:04 AM, Adam Moffett <[email protected]> wrote: > > Right, well the symptom was described as "locked up", but maybe he lost > ethernet connection, or maybe the power supply tripped an internal breaker, > it's not always easy to tell the difference. > > >> He said his AF locked up and a power cycle resolved it. >> >> Josh Luthman >> Office: 937-552-2340 >> Direct: 937-552-2343 >> 1100 Wayne St >> Suite 1337 >> Troy, OH 45373 >> >>> On Feb 25, 2015 10:38 PM, "Chuck Macenski" <[email protected]> wrote: >>> Hi, >>> >>> I don't really have enough details to help here yet. We do not see >>> lock-ups...if that is what is happening, I would like to know about it. >>> >>> Chuck >>> >>>> On Wed, Feb 25, 2015 at 10:15 PM, Jaime Solorza >>>> <[email protected]> wrote: >>>> Sounds like line conditioning might make sense for Air Fibers? >>>> >>>> Jaime Solorza >>>> >>>>> On Feb 25, 2015 8:19 PM, "Brett A Mansfield" >>>>> <[email protected]> wrote: >>>>> Thanks guys. I'll check the voltage and if it's good I won't worry about >>>>> it. I only two links of af24's, so I doubt I'll see this too often. >>>>> >>>>> Thank you, >>>>> Brett A Mansfield >>>>> >>>>> > On Feb 25, 2015, at 7:59 PM, Josh Reynolds <[email protected]> wrote: >>>>> > >>>>> > Normally power issues at the site. Voltage sags can do that. >>>>> > >>>>> > We see them do it, but it's very rare. Maybe one every year out of the >>>>> > 2 or 3 dozen links we have. >>>>> > >>>>> > -- >>>>> > Josh Reynolds >>>>> > CIO, SPITwSPOTS >>>>> > www.spitwspots.com >>>>> > >>>>> >> On 02/25/2015 03:12 PM, Brett A Mansfield wrote: >>>>> >> Hey whenever have an air five or 20 more lockup on them? My main back >>>>> >> all just locked up and I can't figure out what happened. A simple >>>>> >> power cycle resolve the issue. Definitely time to switch to fiber to >>>>> >> the tower. >>>>> >> >>>>> >> Thank you, >>>>> >> Brett A Mansfield >>>>> > >
