I've seen this multiple times before with the AF24 and firmware versions <1.5 , less often (but not entirely absent) on newer hardware and the latest firmware.


On 2/26/15 4:27 PM, Chuck Macenski wrote:
Thanks. Contacting offlist :)

Chuck

On Thu, Feb 26, 2015 at 10:26 AM, Brett A Mansfield <[email protected]> wrote:
In this case it was the slave. The master lost all communication to the slave. I also could not access it via Ethernet or the management port. There was power to the unit as the red lights were on and indicated the correct signal level, and the ports indicated a connection. It simply wouldn't do anything at all.  A power cycle got it responding again.

Thank you,
Brett A Mansfield

On Feb 26, 2015, at 9:04 AM, Adam Moffett <[email protected]> wrote:

Right, well the symptom was described as "locked up", but maybe he lost ethernet connection, or maybe the power supply tripped an internal breaker, it's not always easy to tell the difference.


He said his AF locked up and a power cycle resolved it.

Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373

On Feb 25, 2015 10:38 PM, "Chuck Macenski" <[email protected]> wrote:
Hi,

I don't really have enough details to help here yet. We do not see lock-ups...if that is what is happening, I would like to know about it.

Chuck

On Wed, Feb 25, 2015 at 10:15 PM, Jaime Solorza <[email protected]> wrote:

Sounds like line conditioning might make sense for Air Fibers?

Jaime Solorza

On Feb 25, 2015 8:19 PM, "Brett A Mansfield" <[email protected]> wrote:
Thanks guys. I'll check the voltage and if it's good I won't worry about it. I only two links of af24's, so I doubt I'll see this too often.

Thank you,
Brett A Mansfield

> On Feb 25, 2015, at 7:59 PM, Josh Reynolds <[email protected]> wrote:
>
> Normally power issues at the site. Voltage sags can do that.
>
> We see them do it, but it's very rare. Maybe one every year out of the 2 or 3 dozen links we have.
>
> --
> Josh Reynolds
> CIO, SPITwSPOTS
> www.spitwspots.com
>
>> On 02/25/2015 03:12 PM, Brett A Mansfield wrote:
>> Hey whenever have an air five or 20 more lockup on them? My main back all just locked up and I can't figure out what happened. A simple power cycle resolve the issue. Definitely time to switch to fiber to the tower.
>>
>> Thank you,
>> Brett A Mansfield
>





Reply via email to