Nice Jaime Solorza On Mar 12, 2015 2:16 PM, "Jeremy" <[email protected]> wrote:
> Deep Slotted strut + two 1 1/2" ten foot conduit sections with clamps = > about $30 and gives you twenty foot of sector mounting space. The MTOW > product line is amazing, but there is something to be said for a solid > solution on the cheap. > > On Thu, Mar 12, 2015 at 2:05 PM, Jaime Solorza <[email protected]> > wrote: > >> Slotted uni strut works well for this but why re invent the wheel? WB mfg >> has affordable mounting options. .. >> >> Jaime Solorza >> On Mar 12, 2015 12:56 PM, "Bill Prince" <[email protected]> wrote: >> >>> And not just plated, but dipped. Makes a big difference. >>> >>> Unistrut is usually just plated. If it's a quality plating job, it >>> might be OK, because I see several bits of galvanized unistrut here and >>> there, and they look fine even after years. But I occasionally see a hunk >>> of unistrut that didn't have enough plating, and they will show their age. >>> >>> HDG hangs in for the long haul. >>> >>> bp >>> <part15sbs{at}gmail{dot}com> >>> >>> >>> On 3/12/2015 11:49 AM, Josh Luthman wrote: >>> >>> I should have said MTOWP is galvanized, in other words it works, works >>> well, don't bother with strut =P >>> >>> >>> Josh Luthman >>> Office: 937-552-2340 >>> Direct: 937-552-2343 >>> 1100 Wayne St >>> Suite 1337 >>> Troy, OH 45373 >>> >>> On Thu, Mar 12, 2015 at 2:40 PM, Chuck McCown <[email protected]> wrote: >>> >>>> I think he was referring to unistrut. MTOW-P doesn’t have a channel >>>> >>>> *From:* Af [mailto:[email protected]] *On Behalf Of *Josh Luthman >>>> *Sent:* Thursday, March 12, 2015 1:49 PM >>>> *To:* [email protected] >>>> *Subject:* Re: [AFMUG] as anybody use power/unistrut for tower stand >>>> off bracket >>>> >>>> >>>> >>>> It's galvanized... >>>> >>>> Josh Luthman >>>> Office: 937-552-2340 >>>> Direct: 937-552-2343 >>>> 1100 Wayne St >>>> Suite 1337 >>>> Troy, OH 45373 >>>> >>>> On Mar 12, 2015 1:44 PM, "That One Guy" <[email protected]> >>>> wrote: >>>> >>>> It works good, but Im leary of it because of the channel holding water >>>> and rust >>>> >>>> >>>> >>>> On Thu, Mar 12, 2015 at 12:41 PM, Josh Luthman < >>>> [email protected]> wrote: >>>> >>>> MTOWP. >>>> >>>> Josh Luthman >>>> Office: 937-552-2340 >>>> Direct: 937-552-2343 >>>> 1100 Wayne St >>>> Suite 1337 >>>> Troy, OH 45373 >>>> >>>> On Mar 12, 2015 1:40 PM, "Tim Reichhart" <[email protected]> wrote: >>>> >>>> as anybody used power/unistrut to make an tower stand off bracket >>>> before? The reason why I am asking this is because I am getting ready to >>>> mount 3 sectors on an tower that is 130 ft up and I see some of them tower >>>> stand offs are around 300 dollars per set I cant see spending that much on >>>> something like this. >>>> >>>> >>>> >>>> Thanks Tim >>>> >>>> >>>> >>>> >>>> >>>> -- >>>> >>>> If you only see yourself as part of the team but you don't see your >>>> team as part of yourself you have already failed as part of the team. >>>> >>> >>> >>> >
