Go to Wal-Mart and buy one of the cheap digital convertors for the old analog TV’s.
Most of them have a signal level meter built in them. From: Af [mailto:[email protected]] On Behalf Of That One Guy Sent: Thursday, March 19, 2015 12:05 PM To: [email protected] Subject: Re: [AFMUG] OTA Television Signal Meter The last one i did that how I did it, the customers TV had a signal meter for the channel, I got on the tower and they called me and read me signal from their TV, worked well for the purpose, probably dependent on TV model whether it has a rel time signal per channel, may not be all that viable in the world, but it got the job done and me paid. On Thu, Mar 19, 2015 at 11:54 AM, Chuck McCown <[email protected]> wrote: A small TV is probably your best bet. Used to be that a Sadelco was the meter to have. Not sure if they will give a good reading on Digital TV signals. Perhaps. Most TV signals are UHF now. You have to have something that can read down in the microvolts. -----Original Message----- From: Matt Sent: Thursday, March 19, 2015 10:52 AM To: [email protected] Subject: [AFMUG] OTA Television Signal Meter Is there an economical OTA television signal meter for aligning a TV antenna on a tower or rooftop? -- If you only see yourself as part of the team but you don't see your team as part of yourself you have already failed as part of the team.
