http://www.winegard.com/sensarpro
its not clear whether this will work On Thu, Mar 19, 2015 at 12:43 PM, Josh Luthman <[email protected]> wrote: > I would think you'd get a TV with a better for this purpose. > > Josh Luthman > Office: 937-552-2340 > Direct: 937-552-2343 > 1100 Wayne St > Suite 1337 > Troy, OH 45373 > On Mar 19, 2015 1:40 PM, "Rex-List Account" <[email protected]> wrote: > >> Yes and a TV. But if your TV doesn’t have a level meter (like mine) or >> you want something >> >> to take along to a customer’s house where you don’t know for sure then it >> is a cheap meter. >> >> >> >> *From:* Af [mailto:[email protected]] *On Behalf Of *Josh Luthman >> *Sent:* Thursday, March 19, 2015 12:35 PM >> *To:* [email protected] >> *Subject:* Re: [AFMUG] OTA Television Signal Meter >> >> >> >> And a TV... Might as well just use a TV. >> >> Josh Luthman >> Office: 937-552-2340 >> Direct: 937-552-2343 >> 1100 Wayne St >> Suite 1337 >> Troy, OH 45373 >> >> On Mar 19, 2015 1:07 PM, "Rex-List Account" <[email protected]> >> wrote: >> >> Go to Wal-Mart and buy one of the cheap digital convertors for the old >> analog TV’s. >> >> Most of them have a signal level meter built in them. >> >> >> >> *From:* Af [mailto:[email protected]] *On Behalf Of *That One Guy >> *Sent:* Thursday, March 19, 2015 12:05 PM >> *To:* [email protected] >> *Subject:* Re: [AFMUG] OTA Television Signal Meter >> >> >> >> The last one i did that how I did it, the customers TV had a signal meter >> for the channel, I got on the tower and they called me and read me signal >> from their TV, worked well for the purpose, probably dependent on TV model >> whether it has a rel time signal per channel, may not be all that viable in >> the world, but it got the job done and me paid. >> >> >> >> On Thu, Mar 19, 2015 at 11:54 AM, Chuck McCown <[email protected]> wrote: >> >> A small TV is probably your best bet. >> >> Used to be that a Sadelco was the meter to have. Not sure if they will >> give a good reading on Digital TV signals. Perhaps. >> Most TV signals are UHF now. You have to have something that can read >> down in the microvolts. >> >> -----Original Message----- From: Matt >> Sent: Thursday, March 19, 2015 10:52 AM >> To: [email protected] >> Subject: [AFMUG] OTA Television Signal Meter >> >> >> >> Is there an economical OTA television signal meter for aligning a TV >> antenna on a tower or rooftop? >> >> >> >> >> >> -- >> >> If you only see yourself as part of the team but you don't see your team >> as part of yourself you have already failed as part of the team. >> > -- If you only see yourself as part of the team but you don't see your team as part of yourself you have already failed as part of the team.
