here's one place:
http://heatshrinksupplies.com/4-1-over-expanded-heat-shrink.html
bp
<part15sbs{at}gmail{dot}com>
On 3/31/2015 6:00 PM, Kurt Fankhauser wrote:
Where do I find 4:1 heat shrink?
Kurt Fankhauser
Wavelinc Communications
P.O. Box 126
Bucyrus, OH 44820
http://www.wavelinc.com <http://www.wavelinc.com/>
tel. 419-562-6405
fax. 419-617-0110
On Tue, Mar 31, 2015 at 8:49 PM, George Skorup (Cyber Broadcasting)
<[email protected] <mailto:[email protected]>> wrote:
Which is another reason why I think I'm going to switch to some
4:1 shrink instead.
I do have a couple of the hex type jumpers. Can't remember where
they came from. And that was well over a year ago when we got
them. I think possibly the WAV equivalents are the hex type.
On 3/31/2015 7:30 PM, Bill Prince wrote:
Oh crap! I just got some of those pigtails and they're all the
hex variety. To make it worse, I just got 100' of the heat
shrink. Double crap!
bp
<part15sbs{at}gmail{dot}com>
On 3/31/2015 4:38 PM, Kurt Fankhauser wrote:
Did cambium change the 16'' pigtail they sell for the 450 AP's
recently? I have been buying them for years and they always had
the round N connector like the one in the photo and recently
from two vendors I started getting them with the Hex shaped
connector like in the attached photo. The problem is the 3:1
heat-shrink I use no longer fits over this new one with the hex nut.
Kurt Fankhauser
Wavelinc Communications
P.O. Box 126
Bucyrus, OH 44820
http://www.wavelinc.com <http://www.wavelinc.com/>
tel. 419-562-6405 <tel:419-562-6405>
fax. 419-617-0110 <tel:419-617-0110>
