I do similar with an rb750. Set it between the radio and their router (radio 
set to bridge – Mikrotik set to bridge two ports together and the customer 
router doing the pppoe authentication)

 

 

From: Af [mailto:[email protected]] On Behalf Of Kurt Fankhauser
Sent: Thursday, April 02, 2015 10:44 AM
To: [email protected]
Subject: Re: [AFMUG] Drop in monitoring device for troubleshooting customers

 

I drop in a Mikrotik RB941 to customers that have suspected issues. I can 
comptletely monitor their entire network that way, WIFI and all.




 

Kurt Fankhauser

Wavelinc Communications

P.O. Box 126

Bucyrus, OH 44820

 <http://www.wavelinc.com/> http://www.wavelinc.com

tel. 419-562-6405

fax. 419-617-0110

 

On Thu, Apr 2, 2015 at 11:41 AM, That One Guy /sarcasm 
<[email protected] <mailto:[email protected]> > wrote:

Im dealing with a customer with what appears to be a legitimate complaint of 
slowness, high latency.

 

The biggest problem is its happenning at night so its not like we can go to his 
house and troubleshoot. The issue doesnt appear to be visible in any of our 
monitoring, but we are limited to viewing from this end and not his

 

I had him download pingplotter and leave it running to a specific IP so show us 
his outbound path when this is going on, but so far it hasnt resulted in 
anything useful.

 

I do have an air router set up as a monitoring bridge between his 450 and his 
router from when we were troubleshooting his 2.4 fsk before we switch him to 
3.65. As far as I can tell this isnt a radio issue, hes always 8x/8x

 

Is there any custom load to drop into this air router that would give me some 
tools like iperf or any other nifty networking tools that would give me the 
equivalent of a console at his house to troubleshoot from?

 

We have a bunch of old thin clients laying around here I have considered 
dropping some lightweight linux onto for a drop in toolset, is anyone aware of 
any specific load for that purpose?


 

-- 

If you only see yourself as part of the team but you don't see your team as 
part of yourself you have already failed as part of the team.

 

Reply via email to