These things are amazing! I just finished converting to dual slant. 34dbi dish on one side, 30dbi dish on the other, 7.75 miles, RX -57 (all chains), 40Mhz channel width, modulation hovering between QAM16 and QAM64. Seeing 260-275Mbps down by 60Mbps up on a 75% duty cycle.
The lights don't seem to work right as far as alignment goes. I spent forever fine tuning through the gui and the lights are still blinking red, one signal level. I wouldn't align with lights anyway. I am extremely impressed with these. Now if only anywhere still had them in stock.... On Sun, Apr 19, 2015 at 1:00 PM, Josh Luthman <[email protected]> wrote: > I'd suggest you try the upgrade. I haven't had any DFS problems outside. > > > Josh Luthman > Office: 937-552-2340 > Direct: 937-552-2343 > 1100 Wayne St > Suite 1337 > Troy, OH 45373 > > On Sun, Apr 19, 2015 at 2:56 PM, Kurt Fankhauser <[email protected]> > wrote: > >> shipped release >> >> Sent from my iPhone >> >> Kurt Fankhauser >> Wavelinc Communications >> P.O. Box 126 >> Bucyrus, OH 44820 >> http://www.wavelinc.com >> tel. 419-562-6405 >> fax. 419-617-0110 >> >> On Apr 19, 2015, at 12:48 PM, Josh Luthman <[email protected]> >> wrote: >> >> Are you on 3.0 or the shipped release? >> >> >> Josh Luthman >> Office: 937-552-2340 >> Direct: 937-552-2343 >> 1100 Wayne St >> Suite 1337 >> Troy, OH 45373 >> >> On Sun, Apr 19, 2015 at 12:31 PM, Kurt Fankhauser <[email protected]> >> wrote: >> >>> Josh, >>> >>> I did set it while in the DFS bands and still didn't make any difference. >>> >>> >>> Kurt Fankhauser >>> >>> Wavelinc Communications >>> >>> P.O. Box 126 >>> >>> Bucyrus, OH 44820 >>> >>> http://www.wavelinc.com >>> >>> tel. 419-562-6405 >>> >>> fax. 419-617-0110 >>> >>> On Sat, Apr 18, 2015 at 10:59 PM, Josh Luthman < >>> [email protected]> wrote: >>> >>>> Definitely set it in the DFS band! >>>> >>>> Josh Luthman >>>> Office: 937-552-2340 >>>> Direct: 937-552-2343 >>>> 1100 Wayne St >>>> Suite 1337 >>>> Troy, OH 45373 >>>> On Apr 18, 2015 10:06 PM, "Kurt Fankhauser" <[email protected]> wrote: >>>> >>>>> Ken, >>>>> This is V/H polarity. Don't really see any need for slant on this >>>>> link. I'm limited for antenna options right now anyway. But these are >>>>> working great so I don't think I'm going to mess with them. >>>>> >>>>> Josh, >>>>> No I did not set antenna gain. >>>>> >>>>> >>>>> Kurt Fankhauser >>>>> >>>>> Wavelinc Communications >>>>> >>>>> P.O. Box 126 >>>>> >>>>> Bucyrus, OH 44820 >>>>> >>>>> http://www.wavelinc.com >>>>> >>>>> tel. 419-562-6405 >>>>> >>>>> fax. 419-617-0110 >>>>> >>>>> On Sat, Apr 18, 2015 at 9:52 PM, Josh Reynolds <[email protected]> >>>>> wrote: >>>>> >>>>>> There isn't really ATPC per say. There are some.. Similar options in >>>>>> 3.x firmware. Have you read Chuck's post on how the AF won't really let >>>>>> you >>>>>> "cheat" on EIRP? Has to do with distance calculations, tx power, etc. >>>>>> >>>>>> >>>>>> On April 18, 2015 5:05:43 PM AKDT, Josh Luthman < >>>>>> [email protected]> wrote: >>>>>>> >>>>>>> The EIRP is messed up unless the ATPC brought mine down to to -60. >>>>>>> I've got it at 25eirp with 19dbi antenna. >>>>>>> >>>>>>> Josh Luthman >>>>>>> Office: 937-552-2340 >>>>>>> Direct: 937-552-2343 >>>>>>> 1100 Wayne St >>>>>>> Suite 1337 >>>>>>> Troy, OH 45373 >>>>>>> On Apr 18, 2015 8:58 PM, "Mathew Howard" <[email protected]> >>>>>>> wrote: >>>>>>> >>>>>>>> looks to me like the antenna gain is at 0db, since it's saying it's >>>>>>>> limiting it to 15dbm EIRP... not that it actually makes any difference, >>>>>>>> since the TX power is going to be at 15dbm either way... it'll just be >>>>>>>> showing 38 on the interface. >>>>>>>> >>>>>>>> On Sat, Apr 18, 2015 at 7:54 PM, Josh Luthman < >>>>>>>> [email protected]> wrote: >>>>>>>> >>>>>>>>> Did you set 23dbi gain? >>>>>>>>> >>>>>>>>> Josh Luthman >>>>>>>>> Office: 937-552-2340 >>>>>>>>> Direct: 937-552-2343 >>>>>>>>> 1100 Wayne St >>>>>>>>> Suite 1337 >>>>>>>>> Troy, OH 45373 >>>>>>>>> On Apr 18, 2015 8:40 PM, "Kurt Fankhauser" <[email protected]> >>>>>>>>> wrote: >>>>>>>>> >>>>>>>>>> First link up. Havn't even fine tuned anything yet. ARC panels on >>>>>>>>>> both ends. >>>>>>>>>> >>>>>>>>>> Initially tried to use DFS freqs and kept getting radar detect. >>>>>>>>>> Even though I was 50mhz away from anything else 5ghz on the same >>>>>>>>>> tower. >>>>>>>>>> Pretty sure the radar detection was coming from itself because it >>>>>>>>>> would >>>>>>>>>> pass the initial bootup listen period and once it started >>>>>>>>>> transmitting >>>>>>>>>> would then get the detections. So don't know what that was about. >>>>>>>>>> >>>>>>>>>> Kurt Fankhauser >>>>>>>>>> >>>>>>>>>> Wavelinc Communications >>>>>>>>>> >>>>>>>>>> P.O. Box 126 >>>>>>>>>> >>>>>>>>>> Bucyrus, OH 44820 >>>>>>>>>> >>>>>>>>>> http://www.wavelinc.com >>>>>>>>>> >>>>>>>>>> tel. 419-562-6405 >>>>>>>>>> >>>>>>>>>> fax. 419-617-0110 >>>>>>>>>> >>>>>>>>> >>>>>>>> >>>>>> -- >>>>>> Sent from my Android device with K-9 Mail. Please excuse my brevity. >>>>>> >>>>> >>>>> >>> >> >
