This tower was built in 2000

Why would a tower company or radio station remove the beacon controller ?

I just got in the building and checked the tower base didn't make it around
the property due to the tall grass  waist high
On May 12, 2015 1:04 PM, "Lewis Bergman" <[email protected]> wrote:

> I just got a price on those while at IWCE and it was more more Than an
> entire new LED light kit. Would save on labor though.
> On May 12, 2015 7:53 AM, "Chuck McCown" <[email protected]> wrote:
>
>>   You can get nice LEDs that screw into an edison base.
>> I presume there are existing fixtures.
>>
>>  *From:* Lewis Bergman <[email protected]>
>> *Sent:* Tuesday, May 12, 2015 11:49 AM
>> *To:* [email protected]
>> *Subject:* Re: [AFMUG] Tower lighting
>>
>>
>> 300 is one beacon and two side lights. Dual LED would run probably $8500
>> to $11000 cost, no labor.
>> On May 12, 2015 7:42 AM, "joseph marsh" <[email protected]> wrote:
>>
>>> 300
>>> On May 12, 2015 12:40 PM, "Chuck McCown" <[email protected]> wrote:
>>>
>>>>   How tall is it?  199’ and below no lights required.
>>>>
>>>>  *From:* joseph marsh <[email protected]>
>>>> *Sent:* Tuesday, May 12, 2015 11:39 AM
>>>> *To:* [email protected]
>>>> *Subject:* Re: [AFMUG] Tower lighting
>>>>
>>>>
>>>>
>>>> a young guy owns it and his sister I'm trying to keep him out of
>>>> trouble
>>>> On May 12, 2015 12:33 PM, "Lewis Bergman" <[email protected]>
>>>> wrote:
>>>>
>>>>> There are several. TWR lighting is good. ITS light is also good. I
>>>>> would suggest Dual RED/WHITE LED to avoid painting. We had a simile
>>>>> situation and we were able to get an easement for $2000 one time payment.
>>>>> Took a lot of work to get it going. If you got a lease and don't own the
>>>>> tower the FCC has a ruling that leasee's are not liable for tower
>>>>> requirements.
>>>>> On May 12, 2015 6:37 AM, "joseph marsh" <[email protected]>
>>>>> wrote:
>>>>>
>>>>>> I have found a abandoned tower and getting a lease this tower needs
>>>>>> new lighting
>>>>>>
>>>>>> Where do I go about buying lights  never done this before
>>>>>>
>>>>>

Reply via email to