>Thoughts?

Don't buy a CMM4.


Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373

On Wed, Jun 3, 2015 at 4:07 PM, Forrest Christian (List Account) <
[email protected]> wrote:

> On the cambium ask the synchronization experts thing I'm doing someone
> pointed out the section in the ePMP manual talking about frequency reuse. I
> had to go look since I had somehow missed that section.   In case you
> haven't seen it, there's a deep discussion about the proper settings when
> you have a "mixed" network of internal GPS, CMM3 and CMM4.   (See Page 94
> in the current release).   I admit my ignorance and I hadn't seen this yet,
> but.....
>
> All I have to say is this:  WTF Cambium?
>
> Ok, I know the dirty little secret that the CMM3 and CMM4 produce
> different timing pulses.   Obviously different enough that it matters in
> the ePMP world.   But the difference is easy enough to fix...  add a fixed
> amount of delay which varies based on the timing source.   They already
> have to delay the GPS timing signal to match the CMM4.    Why not delay the
> two sources which are 'early' to match the 'late' source?   Or even better,
> fix the CMM4 so it matches every other sync source on the planet - I'm
> shocked this hasn't already been done.   Ok, I get it, it might be a
> hardware limitation which prevents one or both of the solutions.   But come
> on, really?
>
> For the record the syncinjectors currently produce "CMM3" timing, not
> "CMM4".  Since it's obvious that the difference matters now, I'm
> considering adding a software witch which allows this to be configured so
> you don't have to deal with a 'mixed' timing source since it seems like a
> CMM4 and internal GPS are identical.  This should permit better operation
> when you have to switch between an internal GPS and a SyncInjector.
>
> Thoughts?
>
> --
> *Forrest Christian* *CEO**, PacketFlux Technologies, Inc.*
> Tel: 406-449-3345 | Address: 3577 Countryside Road, Helena, MT 59602
> [email protected] | http://www.packetflux.com
> <http://www.linkedin.com/in/fwchristian>  <http://facebook.com/packetflux>
>   <http://twitter.com/@packetflux>
>
>

Reply via email to