I was under the impression Canopy (450, not EPMP) did that today. I’d guess LTE systems maybe do as well?
Daniel White (303) 746-3590 From: Af [mailto:[email protected]] On Behalf Of Josh Luthman Sent: Wednesday, June 24, 2015 5:31 PM To: [email protected] Subject: Re: [AFMUG] saf 11ghz lumina status A great idea. I'm one of those that think it should be required in 802.11. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Jun 24, 2015 7:29 PM, "Daniel White" <[email protected] <mailto:[email protected]> > wrote: Also theoretically reduces interference. ATPC even on unlicensed links is a good idea. *************************************************************************** Daniel White SAF North America LLC Cell: +1 (303) 746-3590 <tel:%2B1%20%28303%29%20746-3590> [email protected] <mailto:[email protected]> Skype: danieldwhite Social: LinkedIn <http://www.linkedin.com/in/danielwhite84> *************************************************************************** From: Af [mailto:[email protected] <mailto:[email protected]> ] On Behalf Of Josh Luthman Sent: Wednesday, June 24, 2015 1:35 PM To: [email protected] <mailto:[email protected]> Subject: Re: [AFMUG] saf 11ghz lumina status >extend the overall life of the radio head That's definitely nice to know! Josh Luthman Office: 937-552-2340 <tel:937-552-2340> Direct: 937-552-2343 <tel:937-552-2343> 1100 Wayne St Suite 1337 Troy, OH 45373 On Wed, Jun 24, 2015 at 3:12 PM, Daniel White <[email protected] <mailto:[email protected]> > wrote: Okay so a little knowledge goes a long way :-) The MSE value is fine. There are charts in the manual that describe required MSE per modulation. MSE is something like SNR, but different. Anyways your value is good. ATPC is a great tool. Number one failure of any radio is related to the TX part of the radio… so the lower the TX power, the less stress on vital components. I absolutely recommend ATPC, on any vendors radio (assuming it is implemented well) to extend the overall life of the radio head. Hope that all helps! *************************************************************************** Daniel White SAF North America LLC Cell: +1 (303) 746-3590 <tel:%2B1%20%28303%29%20746-3590> [email protected] <mailto:[email protected]> Skype: danieldwhite Social: LinkedIn <http://www.linkedin.com/in/danielwhite84> *************************************************************************** From: Af [mailto:[email protected] <mailto:[email protected]> ] On Behalf Of That One Guy /sarcasm Sent: Wednesday, June 24, 2015 12:53 PM To: [email protected] <mailto:[email protected]> Subject: [AFMUG] saf 11ghz lumina status this is just over a ten mile hop, it had gotten out of alignment we went up. the target was -43 on the original install and we met that then, no degredation since we realigned it. I had never turned on ATPC, but when it was out of alignment one side was -54 and still at full modulataion, so I turned it on with the target 50-55, TX power is now staying at 8. I wonder though if that stress value is something I should be concerned about, I dont know what is good or bad. I like keeping things neat on the rf side where I can, having that extra 10db power seems reasonable for fade, but I dont want to be cooking a chipset doing so -- If you only see yourself as part of the team but you don't see your team as part of yourself you have already failed as part of the team. _____ <https://www.avast.com/antivirus> This email has been checked for viruses by Avast antivirus software. www.avast.com <https://www.avast.com/antivirus> _____ <https://www.avast.com/antivirus> This email has been checked for viruses by Avast antivirus software. www.avast.com <https://www.avast.com/antivirus> --- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus
