Mimosa B5c with ubiquiti dishes. 11mi link. time for bigger dishes I guess Oh yeah
Sent from my iPhone > On Jul 2, 2015, at 10:02 PM, Ken Hohhof <[email protected]> wrote: > > Well, a little more information might be helpful. You say links, does that > mean these are PTP links? Same antenna gain as the other links that have > lower noise floors? How big an antenna? Could this link have more gain, or > be pointed at a distant noise source? > > What kind of radios? > > Bottom line, there is one way to eliminate a bad radio as the cause, and that > is to replace it. > > You could also try turning off your other radios briefly during a maintenance > window to see if they are bleeding into this one. > > > From: Jon Langeler > Sent: Thursday, July 02, 2015 8:35 PM > To: [email protected] > Subject: Re: [AFMUG] high noise floor ideas? > > Haha. No but it looks like one device that decided to take the whole band and > add a 10db noise floor. we are used to -90 then a bunch of -60 signals in > 20Mhz and at most 80Mhz chunks. Just thought if I was missing something > > Sent from my iPhone > >> On Jul 2, 2015, at 9:12 PM, Mike Hammett <[email protected]> wrote: >> >> Where Jon's at there are more trees than people. Shouldn't be a lot of 5 GHz >> there. ;-) >> >> >> >> ----- >> Mike Hammett >> Intelligent Computing Solutions >> http://www.ics-il.com >> >> From: "Gino Villarini" <[email protected]> >> To: [email protected] >> Sent: Thursday, July 2, 2015 8:04:41 PM >> Subject: Re: [AFMUG] high noise floor ideas? >> >> -80 high noise floor????? >> >>> On Thu, Jul 2, 2015 at 8:59 PM, Jon Langeler <[email protected]> >>> wrote: >>> We have a link with an unusually high noise floor of -80 across the board >>> at a very remote location. Other ends of the links and other links at the >>> tower are seeing -90 noise floor through the band which is expected. Any >>> idea why we would see the higher noise floor on a link end that's across >>> the whole 5Ghz band that should be very low? >>> >>> Sent from my iPhone
