Does it have the latest firmware on it? there was a bug in the early Mimosa firmware that caused some weird stuff to show up on the spectrum analyser.
On Thu, Jul 2, 2015 at 9:51 PM, Jon Langeler <[email protected]> wrote: > Mimosa B5c with ubiquiti dishes. 11mi link. time for bigger dishes I guess > > Oh yeah > > Sent from my iPhone > > On Jul 2, 2015, at 10:02 PM, Ken Hohhof <[email protected]> wrote: > > Well, a little more information might be helpful. You say links, does > that mean these are PTP links? Same antenna gain as the other links that > have lower noise floors? How big an antenna? Could this link have more > gain, or be pointed at a distant noise source? > > What kind of radios? > > Bottom line, there is one way to eliminate a bad radio as the cause, and > that is to replace it. > > You could also try turning off your other radios briefly during a > maintenance window to see if they are bleeding into this one. > > > *From:* Jon Langeler <[email protected]> > *Sent:* Thursday, July 02, 2015 8:35 PM > *To:* [email protected] > *Subject:* Re: [AFMUG] high noise floor ideas? > > Haha. No but it looks like one device that decided to take the whole > band and add a 10db noise floor. we are used to -90 then a bunch of -60 > signals in 20Mhz and at most 80Mhz chunks. Just thought if I was missing > something > > Sent from my iPhone > > On Jul 2, 2015, at 9:12 PM, Mike Hammett <[email protected]> wrote: > > Where Jon's at there are more trees than people. Shouldn't be a lot of 5 > GHz there. ;-) > > > > ----- > Mike Hammett > Intelligent Computing Solutions > http://www.ics-il.com > > ------------------------------ > *From: *"Gino Villarini" <[email protected]> > *To: *[email protected] > *Sent: *Thursday, July 2, 2015 8:04:41 PM > *Subject: *Re: [AFMUG] high noise floor ideas? > > -80 high noise floor????? > > On Thu, Jul 2, 2015 at 8:59 PM, Jon Langeler <[email protected]> > wrote: > >> We have a link with an unusually high noise floor of -80 across the board >> at a very remote location. Other ends of the links and other links at the >> tower are seeing -90 noise floor through the band which is expected. Any >> idea why we would see the higher noise floor on a link end that's across >> the whole 5Ghz band that should be very low? >> >> Sent from my iPhone > > > > >
