I thought they were done updating fsk On Jul 2, 2015 11:01 PM, "Matt Mangriotis" < [email protected]> wrote:
> We spent a LOT of time on those George… we nailed many of them cold in > 13.4. Please let us know if you’re still seeing them (“watchdog reset” can > mean lots of things, there were a couple of cases that we couldn’t > reproduce). > > > > Regarding the “Adobe connecting to review server” thing… ignore it. That > was likely an oversight on our part. We use that server to allow multiple > folks to review and comment on the release notes (you know, for version > control, collaboration, etc.). We were rushing a bit to get the > documentation over the finish line this week before the holiday. > > > > Alignment tone is there and working! > > > > Let us know if you guys find anything else we should know about, this one > was a long time coming… but we’re proud of the finished product. Enjoy. > > > > Happy 4th of July to all! > > > > Matt > > > > *From:* Af [mailto:[email protected]] *On Behalf Of *George Skorup > *Sent:* Thursday, July 02, 2015 9:33 PM > *To:* [email protected] > *Subject:* Re: [AFMUG] Software 13.4 > > > > Hopefully the watchdog resets on 450 APs goes away. That is getting stupid > on 13.2.1. Just had another one about 10 minutes ago. > > On 7/2/2015 7:50 PM, Mark Radabaugh wrote: > > We have been running 13.4 build 11 for some time now. I have not seen > any major issues with it. > > > > The 450 build works fine on the 430 AP’s. > > > > The only thing that I know was a problem was P8 FSK radios bricking when > upgraded to build 11. I have not read the release notes to see if the > release version addresses that problem. > > > > Mark > > > > > > On Jul 2, 2015, at 6:10 PM, Bill Prince <[email protected]> wrote: > > > > There is an announcement on the 430 page that the 450 load should be used > on 430s needing to connect to a 450 AP. > > How is this supposed to be managed? Is there a reason to actually load the > 430 firmware on a 430 (anything)? > > > > bp > > <part15sbs{at}gmail{dot}com> > > > > On 7/2/2015 3:02 PM, George Skorup wrote: > > I'm just about to look through the release notes. And then GTFO here for > the long weekend! > > They said the alignment tone issue required a new FPGA build. Guess they > got it done for 13.4. AFAIK, this was only on the 450, PMP100 wasn't > affected. Maybe it messed up the 430 too? > > Combined firmware? You mean for 430 and 450? I guess so. But FSK is still > a separate package. > > On 7/2/2015 4:53 PM, Ryan Ray wrote: > > Definitely different than before. There are mentions of the alignment > tone being fixed in the release notes but I'm not sure if it's for PMP450 > or PMP100 or what. Now that it's all combined firmware. > > > > On Thu, Jul 2, 2015 at 2:35 PM, Ken Hohhof <[email protected]> wrote: > > Is it just me, or was this distributed differently than in the past? I > don’t remember .zip files with the release notes inside. Also when I > opened the release notes, Adobe Reader wanted to connect to a “review > server” and share my email address etc. with all other reviewers. WTF? > Did I just hit some hotkey accidentally? > > > > Also, I don’t see anything in the release notes about SM alignment tone. > Didn’t this break from 13.2.1 to 13.3? To be fixed in 13.4? Or is my > brain just not working today. I thought it was 13.3 and all its progeny > were dead to me because I can’t live without oxygen, water, and alignment > tone. > > > > Lots of cool stuff in 13.4, like sector wide SA, but I need my alignment > tone. > > > > > > *From:* Ryan Ray <[email protected]> > > *Sent:* Thursday, July 02, 2015 4:11 PM > > *To:* [email protected] > > *Subject:* [AFMUG] Software 13.4 > > > > Who's gonna be the first guinea pig? Make sure to do a 1000 unit upgrade > and let us know how it goes :P > > > > > > > > > > > > >
