It ain't dead yet.
On 7/2/2015 11:50 PM, That One Guy /sarcasm wrote:
I thought they were done updating fsk
On Jul 2, 2015 11:01 PM, "Matt Mangriotis"
<matt.mangrio...@cambiumnetworks.com
<mailto:matt.mangrio...@cambiumnetworks.com>> wrote:
We spent a LOT of time on those George… we nailed many of them
cold in 13.4. Please let us know if you’re still seeing them
(“watchdog reset” can mean lots of things, there were a couple of
cases that we couldn’t reproduce).
Regarding the “Adobe connecting to review server” thing… ignore
it. That was likely an oversight on our part. We use that server
to allow multiple folks to review and comment on the release notes
(you know, for version control, collaboration, etc.). We were
rushing a bit to get the documentation over the finish line this
week before the holiday.
Alignment tone is there and working!
Let us know if you guys find anything else we should know about,
this one was a long time coming… but we’re proud of the finished
product. Enjoy.
Happy 4^th of July to all!
Matt
*From:*Af [mailto:af-boun...@afmug.com
<mailto:af-boun...@afmug.com>] *On Behalf Of *George Skorup
*Sent:* Thursday, July 02, 2015 9:33 PM
*To:* af@afmug.com <mailto:af@afmug.com>
*Subject:* Re: [AFMUG] Software 13.4
Hopefully the watchdog resets on 450 APs goes away. That is
getting stupid on 13.2.1. Just had another one about 10 minutes ago.
On 7/2/2015 7:50 PM, Mark Radabaugh wrote:
We have been running 13.4 build 11 for some time now. I have
not seen any major issues with it.
The 450 build works fine on the 430 AP’s.
The only thing that I know was a problem was P8 FSK radios
bricking when upgraded to build 11. I have not read the
release notes to see if the release version addresses that
problem.
Mark
On Jul 2, 2015, at 6:10 PM, Bill Prince
<part15...@gmail.com <mailto:part15...@gmail.com>> wrote:
There is an announcement on the 430 page that the 450 load
should be used on 430s needing to connect to a 450 AP.
How is this supposed to be managed? Is there a reason to
actually load the 430 firmware on a 430 (anything)?
bp
<part15sbs{at}gmail{dot}com>
On 7/2/2015 3:02 PM, George Skorup wrote:
I'm just about to look through the release notes. And
then GTFO here for the long weekend!
They said the alignment tone issue required a new FPGA
build. Guess they got it done for 13.4. AFAIK, this
was only on the 450, PMP100 wasn't affected. Maybe it
messed up the 430 too?
Combined firmware? You mean for 430 and 450? I guess
so. But FSK is still a separate package.
On 7/2/2015 4:53 PM, Ryan Ray wrote:
Definitely different than before. There are
mentions of the alignment tone being fixed in the
release notes but I'm not sure if it's for PMP450
or PMP100 or what. Now that it's all combined
firmware.
On Thu, Jul 2, 2015 at 2:35 PM, Ken Hohhof
<af...@kwisp.com <mailto:af...@kwisp.com>> wrote:
Is it just me, or was this distributed
differently than in the past? I don’t
remember .zip files with the release notes
inside. Also when I opened the release notes,
Adobe Reader wanted to connect to a “review
server” and share my email address etc. with
all other reviewers. WTF? Did I just hit
some hotkey accidentally?
Also, I don’t see anything in the release
notes about SM alignment tone. Didn’t this
break from 13.2.1 to 13.3? To be fixed in
13.4? Or is my brain just not working today.
I thought it was 13.3 and all its progeny were
dead to me because I can’t live without
oxygen, water, and alignment tone.
Lots of cool stuff in 13.4, like sector wide
SA, but I need my alignment tone.
*From:*Ryan Ray <mailto:ryan...@gmail.com>
*Sent:*Thursday, July 02, 2015 4:11 PM
*To:*af@afmug.com <mailto:af@afmug.com>
*Subject:*[AFMUG] Software 13.4
Who's gonna be the first guinea pig? Make sure
to do a 1000 unit upgrade and let us know how
it goes :P