We have an abundance of ports ATM, so using a simple VLAN seems to be our easiest bet, and helps us if we hit over a gig through the APs or BHs. Our router is the RB1100 as well, so many ports to go around.
Ty, I couldn't find the unofficial guide section, can you point me in the right direction, taking screenshots would work as well, thanks. On Mon, Jul 6, 2015 at 7:18 PM TJ Trout <[email protected]> wrote: > why use as a mid span and waste so many ports when you can trunk them all > back to a single port right? is this because your exceeding 1gig? > On Jul 6, 2015 4:14 PM, "Ty Featherling" <[email protected]> wrote: > >> I've done just what you are saying with mine and I can screenshot the >> VLAN config for you if you like. Also you can find an example in the forums >> under the unofficial guide. >> >> -Ty >> On Jul 6, 2015 4:21 PM, "Josh Corson" <[email protected]> wrote: >> >>> Hi all, >>> >>> Maybe a dumb question but we have not had much experience with VLANs (at >>> all) and are reaching out to get some pointers on how to set up a VLAN on >>> our WS-24 for Mimosa BH's. We planned on using the first four ports that >>> have 48VH to power backhauls, but do not want them switched necessarily. >>> The goal is to pair ports (I.e. Port 1 for POE to backhaul and a latter >>> port like 12 for the LAN to plug up to our router. Basically just bypassing >>> a power brick and using the Netonix for Poe. Anything special about this >>> setup? Any help here would be appreciated. >>> >>> Josh >>> >>
