Check here Josh. If you can't get it worked out I will help further. -Ty On Jul 6, 2015 7:50 PM, "Josh Corson" <[email protected]> wrote:
> We have an abundance of ports ATM, so using a simple VLAN seems to be our > easiest bet, and helps us if we hit over a gig through the APs or BHs. Our > router is the RB1100 as well, so many ports to go around. > > Ty, I couldn't find the unofficial guide section, can you point me in the > right direction, taking screenshots would work as well, thanks. > > On Mon, Jul 6, 2015 at 7:18 PM TJ Trout <[email protected]> wrote: > >> why use as a mid span and waste so many ports when you can trunk them all >> back to a single port right? is this because your exceeding 1gig? >> On Jul 6, 2015 4:14 PM, "Ty Featherling" <[email protected]> wrote: >> >>> I've done just what you are saying with mine and I can screenshot the >>> VLAN config for you if you like. Also you can find an example in the forums >>> under the unofficial guide. >>> >>> -Ty >>> On Jul 6, 2015 4:21 PM, "Josh Corson" <[email protected]> wrote: >>> >>>> Hi all, >>>> >>>> Maybe a dumb question but we have not had much experience with VLANs >>>> (at all) and are reaching out to get some pointers on how to set up a VLAN >>>> on our WS-24 for Mimosa BH's. We planned on using the first four ports that >>>> have 48VH to power backhauls, but do not want them switched necessarily. >>>> The goal is to pair ports (I.e. Port 1 for POE to backhaul and a latter >>>> port like 12 for the LAN to plug up to our router. Basically just bypassing >>>> a power brick and using the Netonix for Poe. Anything special about this >>>> setup? Any help here would be appreciated. >>>> >>>> Josh >>>> >>>
