Hi George, I suppose by AutoSync bug you meant Sync not coming back to power port when the config is Power Port+Free Run. If yes, then we have fixed the issue in 13.4 Official Release. Please give it a try.
Thanks, Chitrang Srivastava Cambium Networks -----Original Message----- From: Af [mailto:[email protected]] On Behalf Of George Skorup Sent: 14 July 2015 08:33 To: [email protected] Subject: Re: [AFMUG] Software 13.4: P8 FSK not recommended Yes, you get MIMO-A and improved automatic rate adapt. Compared to 12.x anyway. 12.1 is really old, I'm surprised anyone has held out so long. Most of the 12.x issues were resolved in the final 12.2.2 release. So if I wanted to stay in the stone age, that's where I'd be. No offense. :) I'm still waiting for the AutoSync bugs to be fixed. Matt is on vacation (must be nice to get vacations) and Aaron went MIA from the list months ago. They did have him and his team locked in a room though. I heard they pushed food under the door sometimes. :) On 7/13/2015 9:29 PM, Ken Hohhof wrote: > I would say you really, really need to take your 450 stuff to at least > 13.2. I didn't go beyond that because of the alignment tone screwup. > Which I think is fixed in 13.4, so I will start cautiously going > there. But while I don't remember the exact issues or sequence of > events, I know 13.2 fixed some serious performance/stability issues we > were having. George probably remembers better than I do. > > > -----Original Message----- From: SmarterBroadband > Sent: Monday, July 13, 2015 7:04 PM > To: [email protected] > Subject: Re: [AFMUG] Software 13.4: P8 FSK not recommended > > Doing my network tonight. Had been planning for 13.2.1. Just saw > this on 13.4? Most of my network is on 12.1. Do I need to go to an > interim release or can I safely jump to 13.2.1 (or even 13.4). > > Not sure I am willing to risk 13.4 tonight. Maybe wait a month. > > Adam > > -----Original Message----- > From: Af [mailto:[email protected]] On Behalf Of George Skorup > Sent: Monday, July 13, 2015 4:30 PM > To: [email protected] > Subject: Re: [AFMUG] Software 13.4: P8 FSK not recommended > > 13.4 is released. Other than the P8 thing Bill mentioned (and I > confirmed on the bench), haven't seen any issues yet. I have a very > small number of APs and SMs update so far though. > > On 7/13/2015 6:20 PM, SmarterBroadband wrote: >> Hi Bill >> >> Is 13.4 GA? Any issues other than FSK? >> >> Thanks >> >> Adam >> >> -----Original Message----- >> From: Af [mailto:[email protected]] On Behalf Of Bill Prince >> Sent: Wednesday, July 08, 2015 8:06 PM >> To: [email protected] >> Subject: Re: [AFMUG] Software 13.4: P8 FSK not recommended >> >> We did another couple groups of updates to 13.4 last night. On one >> sector we had a couple of very low volume users on P8 FSK. Both of >> them bricked. >> >> Well, not exactly bricked. We should have updated them to newer >> hardware a long time ago, and since they were not heavy users, it >> really was not a priority item. >> >> So we swapped them out today, and brought them back to the shop. >> Turns out you could bring them back to life if you default them. Cool >> I thought. However, as soon as you apply a "real" configuration, they >> revert to brick mode. No ethernet, no life. You can re-reset them and >> bring them back. So I defaulted one, and downgraded to 13.1.3, and >> all is well, or as well as a P8 can be. >> >> Not real valuable, but if you have some old P8 FSK still running >> anywhere, I do not recommend you try 13.4 on them. >> >> bp >> <part15sbs{at}gmail{dot}com> >> >> On 7/2/2015 2:11 PM, Ryan Ray wrote: >>> Who's gonna be the first guinea pig? Make sure to do a 1000 unit >>> upgrade and let us know how it goes :P >>> > >
