Probably shouldn't have any issues going straight to 13.4. But Cambium
will tell you it's untested and unsupported. Some issues to watch out
for: uncalibrated 450 APs and SMs (since you're coming from 12.1); 450
APs on 2.5MHz center frequencies, SMs may get 2.5 centers deselected in
the scan list. Although, I think 2.5MHz centers didn't come until 12.2?
Man, it's been so long and so much changing that it's hard to remember
everything that could give you a horrible morning after a system-wide
update. For FSK though, shouldn't be much to break. Well, besides this
P8 NAT issue.
On 7/13/2015 7:04 PM, SmarterBroadband wrote:
Doing my network tonight. Had been planning for 13.2.1. Just saw this on
13.4? Most of my network is on 12.1. Do I need to go to an interim release or
can I safely jump to 13.2.1 (or even 13.4).
Not sure I am willing to risk 13.4 tonight. Maybe wait a month.
Adam
-----Original Message-----
From: Af [mailto:[email protected]] On Behalf Of George Skorup
Sent: Monday, July 13, 2015 4:30 PM
To: [email protected]
Subject: Re: [AFMUG] Software 13.4: P8 FSK not recommended
13.4 is released. Other than the P8 thing Bill mentioned (and I confirmed on
the bench), haven't seen any issues yet. I have a very small number of APs and
SMs update so far though.
On 7/13/2015 6:20 PM, SmarterBroadband wrote:
Hi Bill
Is 13.4 GA? Any issues other than FSK?
Thanks
Adam
-----Original Message-----
From: Af [mailto:[email protected]] On Behalf Of Bill Prince
Sent: Wednesday, July 08, 2015 8:06 PM
To: [email protected]
Subject: Re: [AFMUG] Software 13.4: P8 FSK not recommended
We did another couple groups of updates to 13.4 last night. On one sector we
had a couple of very low volume users on P8 FSK. Both of them bricked.
Well, not exactly bricked. We should have updated them to newer hardware a long
time ago, and since they were not heavy users, it really was not a priority
item.
So we swapped them out today, and brought them back to the shop. Turns out you could
bring them back to life if you default them. Cool I thought. However, as soon as you
apply a "real" configuration, they revert to brick mode. No ethernet, no life.
You can re-reset them and bring them back. So I defaulted one, and downgraded to 13.1.3,
and all is well, or as well as a P8 can be.
Not real valuable, but if you have some old P8 FSK still running anywhere, I do
not recommend you try 13.4 on them.
bp
<part15sbs{at}gmail{dot}com>
On 7/2/2015 2:11 PM, Ryan Ray wrote:
Who's gonna be the first guinea pig? Make sure to do a 1000 unit
upgrade and let us know how it goes :P
